SPS-93100RWG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 3.2Gb/s Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-93100RWG
***********************************************************************************************************************************************************************
SPS-93100RWG / SPS-93100BRWG / SPS-93100ARWG
(RoHS Compliant)
3.3V / 1550 nm / 3.2Gb/s Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Multirate up to 3.2 Gbps
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l SFF-8472 Digital Diagnostic Function
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 28 dB Power Budget at Least
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: SPS-93100RWG
l -10 to 85^oC Operation: SPS-93100BRWG
l -40 to 85^oC Operation: SPS-93100ARWG
l Class 1 Laser International Safety Standard IEC-60825
The SPS-93100RWG series single mode transceivers is
small form factor pluggable module for bi-directional serial
optical data communications such as 10GBASE LX-4,
Serial ATA/ATA2, SONET OC-48 / SDH STM-16,
Gigabit Ethernet 1000BASE-LX and 1x/2x Fibre Channel.
It is with the SFP 20-pin connector to allow hot plug
capability. Digital diagnostic functions are available via an
I²C. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 28 dB is offered which can
correspond to a link distance of over 100 km (assuming
worst case fiber loss of 0.22 dB/km). The transmitter
section uses a multiple quantum well 1550 nm DFB laser
and is a class 1 laser compliant according to International
Compliant
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
APPLICATIONS
an optical header and a limiting post-amplifier IC.
l 10GBASE LX-4
l Serial ATA / ATA2
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET Distance Wavelength
/SDH
(km)
(nm)
Package
Temp. TX Power
(^oC)
(dBm)
SPS-93100RWG Multirate*
100 1550 DFB LC SFP with DMI 0 to 70 5 to 0
SPS-93100BRWG Multirate*
100 1550 DFB LC SFP with DMI -10 to 85 5 to 0
SPS-93100ARWG Multirate*
100 1550 DFB LC SFP with DMI -40 to 85 5 to 0
Multirate*: 3.185Gb/s, 3.125Gb/s, 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
RX Sens.
(dBm)
-28
-28
-28
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-93100RWG
-10
85
SPS-93100BRWG
-40
85
SPS-93100ARWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.1
Operating Case Temperature
Topr
0
-10
-40
Power Supply Current
Data Rate
I_{CC (TX+RX)}
125
Typ
3.3
230
3125
Max
3.5
70
85
85
300
3200
Units / Notes
V
o_{C / SPS-93100RWG}
o_{C / SPS-93100BRWG}
o_{C / SPS-93100ARWG}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V1.0