SPS-9140RG_2015 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.2Gb/s SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9140RG
***********************************************************************************************************************************************************************
SPS-9140RG / SPS-9140BRG / SPS-9140ARG
(RoHS Compliant)
3.3V / 1310 nm / 3.2Gb/s SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Multirate up to 3.2 Gbps
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l SFF-8472 Digital Diagnostic Function
l 1310 nm DFB LD Transmitter
l 20 dB Power Budget at Least
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation : SPS-9140RG
l -10 to 85^oC Operation : SPS-9140BRG
l -40 to 85^oC Operation : SPS-9140ARG
l Class 1 Laser International Safety Standard IEC-60825
The SPS-9140RG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as 10GBASE LX-4,
Serial ATA/ATA2, SONET OC-48 / SDH STM-16,
Gigabit Ethernet 1000BASE-LX and 1x/2x Fibre Channel.
It is with the SFP 20-pin connector to allow hot plug
capability. This module is designed for single mode fiber
and operates at a nominal wavelength of 1310 nm. A
guaranteed minimum optical link budget of 20 dB is
offered which can correspond to a link distance of over 40
km (assuming worst case fiber loss of 0.4 dB/km). The
transmitter section uses a multiple quantum well 1310 nm
DFB laser and is a class 1 laser compliant according to
Compliant
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
APPLICATIONS
l 10GBASE LX-4
l Serial ATA / ATA2
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
Distance Wavelength
(km)
(nm)
Package
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm)
(dBm) Compliant
SPS-9140RG
Multirate*
40
1310 DFB
LC SFP
0 to 70 5 to 0
-20
Yes
SPS-9140BRG Multirate*
40
1310 DFB
LC SFP
-10 to 85 5 to 0
-20
Yes
SPS-9140ARG Multirate*
40
1310 DFB
LC SFP
-40 to 85 5 to 0
-20
Yes
Multirate*: 3.185Gb/s, 3.125Gb/s, 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-9140RG
-10
85
SPS-9140BRG
-40
85
SPS-9140ARG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.1
Operating Case Temperature
Topr
0
-10
-40
Power Supply Current
I_{CC (TX+RX)}
Data Rate
125
Typ
3.3
230
3125
Max
3.5
70
85
85
300
3200
Units / Notes
V
o_{C / SPS-9140RG}
o_{C / SPS-9140BRG}
o_{C / SPS-9140ARG}
mA
Mb/s
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2009 V2.0