SPS-9140MWG_2015 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9140MWG
***********************************************************************************************************************************************************************
SPS-9140MWG / SPS-9140BMWG / SPS-9140AMWG
(RoHS Compliant)
3.3V / 1310 nm / Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-48 (LR-1) / SDH STM-16
The SPS-9140MWG series single mode transceivers is
small form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-48 / SDH
(L-16.1)
l Compliant with Fibre Channel 1x/2x SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE
l SFF-8472 Digital Diagnostic Function
l 1310 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 26 dB Power Budget at Least
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation : SPS-9140MWG
l -10 to 85^oC Operation : SPS-9140BMWG
l -40 to 85^oC Operation : SPS-9140AMWG
l Class 1 Laser International Safety Standard IEC-60825
STM-16, Gigabit Ethernet 1000BASE and Fibre Channel
1x/2x SM-LC-L FC-PI. It is with the SFP 20-pin connector
to allow hot plug capability. Digital diagnostic functions are
available via an I²C. This module is designed for single
mode fiber and operates at a nominal wavelength of 1310
nm. A guaranteed minimum optical link budget of 26 dB is
offered which can correspond to a link distance of over 40
km (assuming worst case fiber loss of 0.45 dB/km). The
transmitter section uses a multiple quantum well 1310 nm
DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength
Package
(Mb/s)
/SDH
(km)
(nm)
SPS-9140MWG Multirate* LR-1/L-16.1
40
1310 DFB LC SFP with DMI
SPS-9140BMWG Multirate* LR-1/L-16.1
40
1310 DFB LC SFP with DMI
SPS-9140AMWG Multirate* LR-1/L-16.1
40
1310 DFB LC SFP with DMI
Multirate*: 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Temp.
(^oC)
0 to 70
-10 to 85
-40 to 85
TX Power
(dBm)
3 to -2
3 to -2
3 to -2
RX Sens.
(dBm)
-28
-28
-28
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-9140MWG
-10
85
SPS-9140BMWG
-40
85
SPS-9140AMWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.1
Operating Case Temperature
Topr
0
-10
-40
Power Supply Current
Data Rate
I_{CC (TX+RX)}
125
Typ
3.3
230
2488
Max
3.5
70
85
85
300
2670
Units / Notes
V
o_{C / SPS-9140MWG}
o_{C / SPS-9140BMWG}
o_{C / SPS-9140AMWG}
mA
Mb/s
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V2.0