SPS-9140MG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9140MG
***********************************************************************************************************************************************************************
SPS-9140MG / SPS-9140BMG (RoHS Compliant)
3.3V / 1310 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-48 (LR-1) / SDH STM-16
The SPS-9140MG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-48 / SDH
(L-16.1)
l Compliant with Fibre Channel 1x/2x SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE
l 1310 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 26 dB Power Budget at Least
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation : SPS-9140MG
l -10 to 85^oC Operation : SPS-9140BMG
l Class 1 Laser International Safety Standard IEC-60825
STM-16, Gigabit Ethernet 1000BASE and Fibre Channel
1x/2x SM-LC-L FC-PI. It is with the SFP 20-pin connector
to allow hot plug capability. This module is designed for
single mode fiber and operates at a nominal wavelength of
1310 nm. A guaranteed minimum optical link budget of 26
dB is offered which can correspond to a link distance of
over 40 km (assuming worst case fiber loss of 0.45 dB/km).
The transmitter section uses a multiple quantum well
1310 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
Compliant
limiting post-amplifier IC.
APPLICATIONS
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
Distance Wavelength Package
(km)
(nm)
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm)
(dBm) Compliant
SPS-9140MG
Multirate* LR-1/L-16.1
40
1310 DFB LC SFP 0 to 70 3 to -2
-28
Yes
SPS-9140BMG
Multirate* LR-1/L-16.1
40
1310 DFB LC SFP -10 to 85 3 to -2
-28
Yes
Multirate*: 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-9140MG
-10
85
SPS-9140BMG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.1
Operating Case Temperature
Topr
0
-10
Power Supply Current
Data Rate
I_{CC (TX+RX)}
125
Typ
3.3
230
2488
Max
3.5
70
85
300
2670
Units / Notes
V
o_{C / SPS-9140MG}
o_{C / SPS-9140BMG}
mA
Mb/s
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0