SPS-9140FWG_15 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 2.125 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9140FWG
***********************************************************************************************************************************************************************
SPS-9140FWG / SPS-9140BFWG / SPS-9140AFWG
(RoHS Compliant)
3.3V / 1310 nm / 2.125 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with Fiber Channel 1X/2X SM-LC-L FC-PI
l Compliant with IEEE 802.3z Gigabit Ethernet
l SFF-8472 Digital Diagnostic Function
l 1310 nm DFB LD Transmitter
l 22 dB Power Budget at Least
l Distance up to 40 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation : SPS-9140FWG
l -10 to 85^oC Operation : SPS-9140BFWG
l -40 to 85^oC Operation : SPS-9140AFWG
l Class 1 Laser International Safety Standard IEC 60825
The SPS-9140FWG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet and
Fiber Channel 1x/2x SM-LC-L FC-PI. It is with the SFP
20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I²C. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1310 nm. A guaranteed minimum optical
link budget of 22 dB is offered which can correspond to a
link distance of over 40 km (assuming worst case fiber loss
of 0.4 dB/km). The transmitter section uses a multiple
quantum well 1310 nm DFB laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
Compliant
and a limiting post-amplifier IC.
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
SPS-9140FWG 2.125/1.063 200/100
SPS-9140BFWG 2.125/1.063 200/100
SPS-9140AFWG 2.125/1.063 200/100
Distance
(km)
40
40
40
Wavelength
(nm)
1310 DFB
1310 DFB
1310 DFB
Package
LC SFP with DMI
LC SFP with DMI
LC SFP with DMI
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm) (dBm) Compliant
0 to 70 5 to 0
-22
Yes
-10 to 85 5 to 0
-22
Yes
-40 to 85 5 to 0
-22
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-9140FWG
-10
85
SPS-9140BFWG
-40
85
SPS-9140AFWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Case Temperature
Topr
Power Supply Current
Data Rate
I_{CC (TX+RX)}
Min
3.1
0
-10
-40
1000
Typ
3.3
200
2125
Max
3.5
70
85
85
300
Units / Notes
V
o_{C / SPS-9140FWG}
o_{C / SPS-9140BFWG}
o_{C / SPS-9140AFWG}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V2.0