SPS-9115MWG_08 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm /Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9115MWG
***********************************************************************************************************************************************************************
SPS-9115MWG / SPS-9115BMWG / SPS-9115AMWG
(RoHS Compliant)
3.3V / 1310 nm / Multirate Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
The SPS-9115MWG series single mode transceivers is
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with Short-Reach SONET OC-48 / SDH
small form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-48 / SDH
STM-16 (S-16.1)
l Compliant with Fiber Channel 1x/2x SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE-LX
l SFF-8472 Digital Diagnostic Function
l 1310 nm DFB LD Transmitter
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: SPS-9115MWG
l -10 to 85^oC Operation: SPS-9115BMWG
l -40 to 85^oC Operation: SPS-9115AMWG
l Class 1 Laser International Safety Standard IEC-60825
Compliant
STM-16 (S-16.1), Gigabit Ethernet 1000BASE-LX and
Fiber Channel 1x/2x SM-LC-L FC-PI. It is with the SFP
20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I²C. This module
is designed for single mode fiber and operates at a nominal
wavelength of 1310 nm. The transmitter section uses a
multiple quantum well 1310 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
SPS-9115MWG
Bit Rate SONET
(Mb/s)
/SDH
Multirate* IR-1/ S-16.1
Distance
(km)
15
Wavelength
Package
(nm)
1310 DFB LC SFP with DMI
Temp.
(^oC)
0 to 70
TX Power RX Sens. RoHS
(dBm) (dBm) Compliant
0 to -5
-18
Yes
SPS-9115BMWG Multirate* IR-1/ S-16.1 15
1310 DFB LC SFP with DMI -10 to 85 0 to -5
-18
Yes
SPS-9115AMWG Multirate* IR-1/ S-16.1 15
1310 DFB LC SFP with DMI -40 to 85 0 to -5
-18
Yes
Multirate*: 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-9115MWG.
-10
85
SPS-9115BMWG
-40
85
SPS-9115AMWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.1
Operating Case Temperature
Topr
0
-10
-40
Power Supply Current
Data Rate
I_{CC (TX+RX)}
125
Typ
3.3
200
2488
Max
3.5
70
85
85
300
2670
Units / Notes
V
o_{C / SPS-9115MWG}
o_{C / SPS-9115BMWG}
o_{C / SPS-9115AMWG}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V2.0