SPS-9115MG_2015 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – Multirate SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9115MG
***********************************************************************************************************************************************************************
SPS-9115MG / SPS-9115BMG / SPS-9115AMG
(RoHS Compliant)
3.3V / 1310 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
The SPS-9115MG series single mode transceivers is small
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with Short-Reach SONET OC-48 / SDH
form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-48 / SDH
STM-16 (S-16.1)
l Compliant with Fiber Channel 1x/2x SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE-LX
l 1310 nm DFB LD Transmitter
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: SPS-9115MG
l -10 to 85^oC Operation: SPS-9115BMG
l -40 to 85^oC Operation: SPS-9115AMG
l Class 1 Laser International Safety Standard IEC-60825
Compliant
STM-16 (S-16.1), Gigabit Ethernet 1000BASE-LX and
Fiber Channel 1x/2x SM-LC-L FC-PI. It is with the SFP
20-pin connector to allow hot plug capability. This module
is designed for single mode fiber and operates at a nominal
wavelength of 1310 nm. The transmitter section uses a
multiple quantum well 1310 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
LASER SAFETY
APPLICATIONS
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
Distance Wavelength Package
(km)
(nm)
SPS-9115MG
Multirate* IR-1/ S-16.1
15
1310 DFB LC SFP
SPS-9115BMG
Multirate* IR-1 / S-16.1 15
1310 DFB LC SFP
SPS-9115AMG
Multirate* IR-1 / S-16.1 15
1310 DFB LC SFP
Multirate*: 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Temp.
(^oC)
0 to 70
-10 to 85
-40 to 85
TX Power
(dBm)
0 to -5
0 to -5
0 to -5
RX Sens.
(dBm)
-18
-18
-18
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-9115MG.
-10
85
SPS-9115BMG
-40
85
SPS-9115AMG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.1
Operating Case Temperature
Topr
0
-10
-40
Power Supply Current
Data Rate
I_{CC (TX+RX)}
125
Typ
3.3
200
2488
Max
3.5
70
85
85
300
2670
Units / Notes
V
o_{C / SPS-9115MG}
o_{C / SPS-9115BMG}
o_{C / SPS-9115AMG}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V2.0