SPS-9115G_15 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 2.5 Gbps SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9115G
***********************************************************************************************************************************************************************
SPS-9115G / SPS-9115BG / SPS-9115AG
(RoHS Compliant)
3.3V / 1310 nm / 2.5 Gbps SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
The SPS-9115G series single mode transceivers is small
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-48 IR-1/ SDH STM-16
form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-48 / SDH
(S-16.1)
l Compliant with Fibre Channel 1x/2x SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE
l 1310 nm DFB LD Transmitter
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: SPS-9115G
l -10 to 85^oC Operation: SPS-9115BG
l -40 to 85^oC Operation: SPS-9115AG
l Class 1 Laser International Safety Standard IEC-60825
Compliant
STM-16 (S-16.1), Gigabit Ethernet 1000BASE-LX and
Fibre Channel 1x/2x SM-LC-L FC-PI. It is with the SFP
20-pin connector to allow hot plug capability. This module
is designed for single mode fiber and operates at a nominal
wavelength of 1310 nm. The transmitter section uses a
multiple quantum well 1310 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
LASER SAFETY
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Gb/s)
/SDH
SPS-9115G
2.488 IR-1/S-16.1
SPS-9115BG
2.488 IR-1/S-16.1
SPS-9115AG
2.488 IR-1/S-16.1
Distance
(km)
15
15
15
Wavelength
(nm)
1310 DFB
1310 DFB
1310 DFB
Package
LC SFP
LC SFP
LC SFP
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm)
(dBm) Compliant
0 to 70 0 to -5
-18
Yes
-10 to 85 0 to -5
-18
Yes
-40 to 85 0 to -5
-18
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-9115G
-10
85
SPS-9115BG
-40
85
SPS-9115AG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Power Supply Voltage
Vcc
3.1
3.3
Operating Case Temperature
Topr
0
-10
-40
Power Supply Current
Data Rate
I_{CC (TX+RX)}
622
200
2488
1. OC-48, Gigabit Ethernet and 1x/2x Fibre Channel compliant.
Max
3.5
70
85
85
300
2670
Units / Notes
V
o_{C / SPS-9115G}
o_{C / SPS-9115BG}
o_{C / SPS-9115AG}
mA
Mb/s / 1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V2.0