SPS-9110FG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 2.125 Gbps LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-9110FG
***********************************************************************************************************************************************************************
SPS-9110FG / SPS-9110AFG (RoHS Compliant)
3.3V / 1310 nm / 2.125 Gbps LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with Fibre Channel 1X/2X SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE-LX
l 1310 nm LD Transmitter
l Distance up to 10 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l -10 to 85^oC Operation: SPS-9110FG
l -40 to 85^oC Operation: SPS-9110AFG
l Class 1 Laser International Safety Standard IEC 60825
The SPS-9110FG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet
1000BASE-LX and Fibre Channel 1x/2x SM-LC-L FC-PI.
It is with the SFP 20-pin connector to allow hot plug
capability. This module is designed for single mode fiber
and operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
SPS-9110FG
2.125/1.063 200/100
SPS-9110AFG
2.125/1.063 200/100
Distance
(km)
10
10
Wavelength
(nm)
1310
1310
Package
LC SFP
LC SFP
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm)
(dBm) Compliant
-10 to 85 -3 to -8
-21
Yes
-40 to 85 -3 to -8
-21
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
-10
85
o_C
-40
85
Power Supply Voltage
Vcc
-0.5
3.6
V
Notes
SPS-9110FG
SPS-9110AFG
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Case Temperature
Topr
Power Supply Current
Data Rate
I_{CC (TX+RX)}
Min
3.1
-10
-40
1000
Typ
3.3
200
2125
Max
3.5
85
85
300
Units / Notes
V
o_{C / SPS-9110FG}
o_{C / SPS-9110AFG}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0