SPS-73200G_2015 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1.25 Gbps LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-73200G
**********************************************************************************************************************************************************************
SPS-73200G
(RoHS Compliant)
3.3V / 1550 nm / 1.25 Gbps LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with IEEE 802.3z Gigabit Ethernet
l Compliant with Fibre Channel 1X SM-LC-L FC-PI
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 41 dB Power Budget at Least
l Distance up to 200 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation
l Class 1 Laser International Safety Standard IEC-60825
The SPS-73200G series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet
1000BASE-ZX and Fibre Channel 1x SM-LC-L FC-PI. It is
with the SFP 20-pin connector to allow hot plug capability.
This module is designed for single mode fiber and operates
at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 41 dB is offered which can
correspond to a link distance of over 200 km (assuming
worst case fiber loss of 0.2 dB/km). The transmitter section
uses a multiple quantum well 1550 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
Compliant
integrated InGaAs Avalanche photodetector preamplifier
mounted in an optical header and a limiting post-amplifier
APPLICATIONS
IC.
l Gigabit Ethernet Switches and Routers
l Fibre Channel Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
BASE
SPS-73200G
1.25/1.063
Distance
(km)
200
Wavelength
(nm)
1550 DFB
Package
LC SFP
Case Temp. TX Power RX Sens.
(^oC)
(dBm)
(dBm)
0 to 70
8 to 5
-36
Absolute Maximum Ratings
Parameter
Symbol
Min
Storage Temperature
Tstg
-40
Operating Case Temperature
Topr
0
Power Supply Voltage
Vcc
-0.5
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Operating Case Temperature
Topr
0
Power Supply Current
Data Rate
I_{CC (TX+RX)}
Max
85
70
3.6
Typ
3.3
230
1250
Units
o_C
o_C
V
Notes
Air flow 1m/sec
Max
3.47
70
280
Units / Notes
V
o_{C / air flow 1m/sec}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V1.0