SPS-7140WG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 1.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-7140WG
***********************************************************************************************************************************************************************
SPS-7140WG / SPS-7140BWG (RoHS Compliant)
3.3V / 1310 nm / 1.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with IEEE 802.3z 1000BASE-LX
l Compliant with Fibre Channel 1x SM-LC-L FC-PI
l SFF-8472 Digital Diagnostic Function
l AC/AC Coupling according to MSA
The SPS-7140WG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet
1000BASE-LX and Fiber Channel 1x SM-LC-L FC-PI. It is
with the SFP 20-pin connector to allow hot plug capability.
Digital diagnostic functions are available via an I²C. This
l 1310 nm DFB LD Transmitter
module is designed for single mode fiber and operates at a
l Distance up to 40 km
l Single +3.3 V Power Supply
nominal wavelength of 1310 nm. The transmitter section
uses a multiple quantum well laser and is a class 1 laser
l RoHS Compliant
l 0 to 70^oC Operation: SPS-7140WG
l -10 to 85^oC Operation: SPS-7140BWG
l Class 1 Laser International Safety Standard IEC-60825
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
l Gigabit Ethernet Switches and Routers
l Fibre Channel Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000
(Gb/s) BASE
SPS-7140WG
1.25
SPS-7140BWG
1.25
Distance Wavelength
(km)
(nm)
Package
40
1310 DFB LC SFP with DMI
40
1310 DFB LC SFP with DMI
Temp. TX Power
(^oC)
(dBm)
0 to 70 3 to -2
-10 to 85 3 to -2
RX Sens. RoHS
(dBm) Compliant
-24
Yes
-24
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-7140WG
-10
85
SPS-7140BWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.1
Operating Case Temperature
Topr
0
-10
Power Supply Current
Data Rate
I_{CC (TX+RX)}
100
Typ
3.3
200
1250
Max
3.5
70
85
300
Units / Notes
V
o_{C / SPS-7140WG}
o_{C / SPS-7140BWG}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0