SPS-7110VW-2TG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1310 nm / 1.5 Gb/s Medium Power Dual Optical SM Digital Diagnostic Transmitter

Optoway
1
SPS-7110VW-2TG
***********************************************************************************************************************************************************************
SPS-7110VW-2TG
(RoHS Compliant)
1310 nm / 1.5 Gb/s Medium Power Dual Optical SM Digital Diagnostic Transmitter
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l SMPTE 292M/297M/259M Compatible
l Speed from 50 Mbps to 1.5 Gbps
l Support Video Pathological Patterns for SD-SDI and
The SPS-7110VW-2TG is a dual channel optical single
mode transmitter module designed to transmit optical serial
digital signals as defined in SMPTE 292M/297M/259M. It
HD-SDI
l Dual Transmitter with Duplex LC
l Based on Industry Standard SFP
supports from 50 Mbps to 1.5 Gbps and is specifically
designed for transmitted the SMPTE 292M, SMPTE 297M
and SMPTE 259M SDI pathological patterns. It is with the
l SFF-8472 Digital Diagnostic Function
l Two Independent TTL Laser Disable Input
l Single +3.3 V Power Supply
l RoHS-6 Compliant
l 0 to 70^oC Operation
l Hot Pluggable
l Class 1 Laser International Safety Standard IEC-60825
SFP 20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I²C. It is with two
independent 1310 nm laser transmitters. Each transmitter
can transmit signal from 50 Mbps to 1.5 Gbps with up to 30
km of single-mode fiber when using the
SPS-7110VW-2RG as the receiver. A maximum distance of
21 km is achievable with 1.5 Gbps pathological signals.
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
l SMPTE 292M/297M/259M Compliant
Electrical-to-Optical Interfaces
l High-density Video Routers
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Type
SPS-7110VW-2TG
2-TX
RELATED PRODUCTS
P/No.
Type
SPS-7110VW-2RG
2-RX
Bit Rate
(Mb/s)
50 to 1500
TX1
λ
Power
(nm)
(dBm)
1310
0 to -7
TX2
λ
Power
(nm) (dBm)
1310 0 to -7
Package
Temp RoHS
(^oC) Compliant
LC SFP with DMI 0 to 70 Yes
Bit Rate
(Mb/s)
RX1
λ
Sen.
(nm)
(dBm)
50 to 1500 1260/1620 0 to -20
RX2
λ
Sen.
(nm) (dBm)
1260/1620 0 to -20
Package
LC SFP with DMI
Temp
(^oC)
0 to 70
RoHS
Compliant
Yes
LINK DISTANCE
Transmitter
SPS-7110VW-2TG
Receiver
SPS-7110VW-2RG
SDI
HD-SDI
SD-SDI
Bit Rate
1.485Gbps
270Mbos
Max. Link Distance (km)
21
30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2008 V1.0