SPS-53120WG_2015 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-53120WG
***********************************************************************************************************************************************************************
SPS-53120WG / SPS-53120BWG / SPS-53120AWG
(RoHS Compliant)
3.3V / 1550 nm / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA Compatible
l Compliant with SONET OC-12 LR / SDH STM-4
l SFF-8472 Digital Diagnostic Function
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Reciever
l 34 dB Power Budget at Least
l Distance up to 120 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: SPS-53120WG
l -10 to 85^oC Operation: SPS-53120BWG
l -40 to 85^oC Operation: SPS-53120AWG
l Class 1 Laser International Safety Standard IEC-60825
The SPS-53120WG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-12 / SDH
STM-4 and Fiber Channel. It is with the SFP 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C. This module is designed
for single mode fiber and operates at a nominal wavelength
of 1550 nm. A guaranteed minimum optical link budget of
34 dB is offered which can correspond to a link distance of
over 120 km (assuming worst case fiber loss of 0.25 dB/km).
The transmitter section uses a multiple quantum well
1550 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs Avalanche
photodetector preamplifier mounted in an optical header
Compliant
and a limiting post-amplifier IC.
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s) /SDH
SPS-53120WG
622
SPS-53120BWG
622
SPS-53120AWG
622
Distance
(km)
120
120
120
Wavelength
(nm)
Package
1550 DFB LC SFP with DMI
1550 DFB LC SFP with DMI
1550 DFB LC SFP with DMI
Temp. TX Power
(^oC )
(dBm)
0 to 70 5 to 0
-10 to 85 5 to 0
-40 to 85 5 to 0
RX Sens.
(dBm)
-34
-34
-34
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-53120WG
-10
85
SPS-53120BWG
-40
85
SPS-53120AWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.13
3.3
3.47
V
Operating Case Temperature
Topr
0
70
o_{C / SPS-53120WG}
-10
85
o_{C / SPS-53120BWG}
-40
85
o_{C / SPS-53120AWG}
Power Supply Current
Data Rate
I_{CC (TX+RX)}
230
300
622
mA
Mb/s
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V2.0