SPS-5120WG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-5120WG
***********************************************************************************************************************************************************************
SPS-5120WG / SPS-5120AWG (RoHS Compliant)
3.3V / 1310 nm / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-12 IR-1 / SDH STM-4
The SPS-5120WG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as IR SONET OC-12 /
(S-4.1)
l SFF-8472 Digital Diagnostic Function
l Distance up to 20km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l -10 to 85^oC Operation : SPS-5120WG
l -40 to 85^oC Operation : SPS-5120AWG
l Class 1 Laser International Safety Standard IEC 60825
SDH STM-4 and Fiber Channel. It is with the SFP 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C. This module is designed
for single mode fiber and operates at a nominal wavelength
of 1310 nm. The transmitter section uses a multiple
quantum well laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
Compliant
limiting post-amplifier IC.
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s) /SDH
SPS-5120WG
622 IR-1/S-4.1
SPS-5120AWG
622 IR-1/S-4.1
Distance Wavelength
(km)
(nm)
Package
Temp. TX Power RX Sens. RoHS
(^oC) (dBm) (dBm) Compliant
20
1310 LC SFP with DMI -10 to 85 -8 to -14 -28
Yes
20
1310 LC SFP with DMI -40 to 85 -8 to -14 -28
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
-10
85
o_C
SPS-5120WG
-40
85
SPS-5120AWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.1
3.3
3.5
V
Operating Case Temperature
Topr
-10
85
o_{C / SPS-5120WG}
-40
85
o_{C / SPS-5120AWG}
Air flow 1m/sec
Power Supply Current
Data Rate
I_{CC (TX+RX)}
200
300
622
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V3.0