SPS-4385W_15 Datasheet, PDF (1/7 Pages) Optoway Technology Inc – 80 km Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-4385W-DXXXG
***********************************************************************************************************************************************************************
SPS-4385W-DXXXG
(RoHS Compliant)
8.5 Gbps/ 50 GHz DWDM / 80 km Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 8.5 Gbps Bi-directional Data Links
l Complaint to SFP+ MSA
l Compliance with Fibre Channel FC-PI-4 800-SM-LC-L
l Compliant with 4G and, 2G Fibre Channel
l Temperature-stabilized DWDM EML Transmitter
l 50 GHz ITU Grid, C Band
l Distance up to 80 km
l SFF-8472 Digital Diagnostic Function
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS 6/6 Compliant
l 0 to 70^oC Operating
l Class 1 Laser International Safety Standard IEC-60825
The SPS-4385W-DXXXG series single mode
transceiver is small form factor pluggable module for
bi-directional serial optical data communications such as
8x/4x/2x Fibre Channel.
It is with the SFP 20-pin connector to allow hot plug
capability. Digital diagnostic functions are available via an
I²C. This module is designed for single mode fiber and
operates at a nominal wavelength of 50GHz ITU Grid, C
Band DWDM wavelength. A guaranteed minimum optical
link budget of 23 dB is offered. The transmitter section
consists of a temperature-stabilized DWDM
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section uses an integrated InGaAs
Compliant
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
APPLICATIONS
l Multi-rate 8x / 4x / 2x Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 8/1/2012 V2.0