SPS-33200WG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 155 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-33200WG
***********************************************************************************************************************************************************************
SPS-33200WG / SPS-33200BWG (RoHS Compliant)
3.3V / 1550 nm / 155 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-3 / SDH STM-1
l SFF-8472 Digital Diagnostic Function
l 1550 nm DFB LD Transmitter
l 46 dB Power Budget at Least
l Distance up to 200 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: SPS-33200WG
l -10 to 85^oC Operation: SPS-33200BWG
l Class 1 Laser International Safety Standard IEC-60825
The SPS-33200WG series single mode transceiver is small
form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-3 / SDH
STM-1 and Fast Ethernet. It is with the SFP 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C. A guaranteed minimum
optical link budget of 46 dB is offered which can
correspond to a link distance of over 200 km (assuming
worst case fiber loss of 0.2 dB/km). This module is
designed for single mode fiber and operates at a nominal
wavelength of 1550 nm. The transmitter section uses a
1550 nm multiple quantum well DFB laser and is a class 1
laser compliant according to International Safety Standard
Compliant
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
APPLICATIONS
and a limiting post-amplifier IC.
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l Fast Ethernet Applications
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s)
/SDH
SPS-33200WG
125 / 155
SPS-33200BWG
125 / 155
Distance
(km)
200
200
Wavelength
(nm)
Package
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm) (dBm) Compliant
1550 DFB LC SFP with DMI 0 to 70 5 to 1
-45
Yes
1550 DFB LC SFP with DMI -10 to 85 5 to 1
-45
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
SPS-33200WG
-10
85
SPS-33200BWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.13
3.3
3.47
V
Operating Case Temperature
Topr
0
70
o_{C / SPS-33200WG}
-10
85
o_{C / SPS-33200BWG}
Power Supply Current
Data Rate
I_{CC (TX+RX)}
200
300
125/155
200
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
3/1/2006 V1.0