SPS-2385W_15 Datasheet, PDF (1/8 Pages) Optoway Technology Inc – 50 GHz DWDM Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-2385W-DXXXG
***********************************************************************************************************************************************************************
SPS-2385W-DXXXG
(RoHS Compliant)
10.3 Gbps / 80 km / 50 GHz DWDM Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 10.5 Gb/s Bi-directional Data Links
l Complaint to SFP+ MSA
l Compliant to IEEE 802.3ae 10GBASE-ER/EW
l Maximum Link Length of 80 km
l Temperature-stabilized DWDM EML Transmitter
l 23 dB Power Budget at Least
l 50 GHz ITU Grid, C Band
l SFF-8472 Digital Diagnostic Function
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS 6/6 Compliant
l 0 to 70^oC Operating
l Class 1 Laser International Safety Standard IEC-60825
The SPS-2385W-DXXXG series single mode transceiver is
small form factor pluggable module for bi-directional serial
optical data communications such as IEEE 802.3ae
10GBASE-ZR/ZW and OC-192/STM-64 LR2. It is with
the SFP 20-pin connector to allow hot plug capability.
Digital diagnostic functions are available via an I²C. This
module is designed for single mode fiber and operates at a
nominal wavelength of 50GHz ITU Grid, C Band DWDM
wavelength. A guaranteed minimum optical link budget of
23 dB is offered. The transmitter section uses
temperature-stabilized DWDM electrical-modulated laser
(EML) and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
Compliant
section uses an integrated InGaAs avalanche photodiode
APPLICATIONS
preamplifier mounted in an optical header and a limiting
post-amplifier IC.
l 10GBASE-ZR/ZW
l OC-192 / STM-64 LR2
l 80 km 10G Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 9/1/2012 V2.0