SPS-2345W_15 Datasheet, PDF (1/8 Pages) Optoway Technology Inc – 50 GHz DWDM Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-2345W-DXXXG
***********************************************************************************************************************************************************************
SPS-2345W-DXXXG
(RoHS Compliant)
10.3 Gbps / 40 km / 50 GHz DWDM Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 10.5 Gb/s Bi-directional Data Links
l Complaint to SFP+ MSA
l Compliant to IEEE 802.3ae 10GBASE-ER/EW
l Maximum Link Length of 40 km
l Temperature-stabilized DWDM EML Transmitter
l 14 dB Power Budget at Least
l 50 GHz ITU Grid, C Band
l SFF-8472 Digital Diagnostic Function
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS 6/6 Compliant
l 0 to 70^oC Operating
l Class 1 Laser International Safety Standard IEC-60825
The SPS-2345W-DXXXG series single mode transceiver is
small form factor pluggable module for bi-directional serial
optical data communications such as IEEE 802.3ae
10GBASE-ER/EW. It is with the SFP 20-pin connector to
allow hot plug capability. Digital diagnostic functions are
available via an I²C. This module is designed for single
mode fiber and operates at a nominal wavelength of 50
GHz ITU Grid, C Band DWDM wavelength. A guaranteed
minimum optical link budget of 14 dB is offered. The
transmitter section uses temperature-stabilized DWDM
electrical-modulated laser (EML) and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
Compliant
detector preamplifier (IDP) mounted in an optical header
APPLICATIONS
l 10GBASE-ER/EW
l OC-192 / STM-64 IR2
l 40 km 10G Fibre Channel
and a limiting post-amplifier IC.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 7/1/2011 V1.0