SPS-2340BWG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 10.3 Gb/s / 40 km / 1550 nm Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-2340WG
***********************************************************************************************************************************************************************
SPS-2340WG / SPS-2340BWG / SPS-2340AWG
(RoHS Compliant)
10.3 Gb/s / 40 km / 1550 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Support 9.95 Gbps to 10.5 Gbps
l Complaint with SFP+ MSA
l Compliant to IEEE 802.3ae 10GBASE-ER
l SFF-8472 Digital Diagnostic Function
l Temperature-stabilized 1550 nm EML Transmitter
l Distance up to 40 km at SM Fiber
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l Low Power consumption
l RoHS 6/6 Compliant
l 0 to 70^oC Operating: SPS-2340WG
l -5 to 85^oC Operating: SPS-2340BWG
l -40 to 85^oC Operating: SPS-2340AWG
l Class 1 Laser International Safety Standard IEC-60825
The SPS-2340WG series single mode transceiver is small
form factor pluggable module for bi-directional serial
optical data communications such as IEEE 802.3ae
10GBASE-ER/EW and 10G FC. It is with the SFP+ 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C. This module is designed
for single mode fiber and operates at a nominal wavelength
of 1550 nm. The transmitter section uses a
temperature-stabilized 1550 nm electrical-modulated laser
(EML) and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
l 10GBASE-ER/EW
l 40 km 10G Fibre Channel
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
SPS-2340WG
10.3
SPS-2340BWG
10.3
SPS-2340AWG
10.3
10GBASE
ER / EW
ER / EW
ER / EW
Absolute Maximum Ratings
Parameter
Storage Temperature
Relative Humidity
Operating Case Temperature
Power Supply Voltage
Receiver Input Optical Power
Symbol
Tstg
RH
Topr
Vcc
Mip
Distance
(km)
40
40
40
Wavelength
(nm)
1550 EML
1550 EML
1550 EML
Package
SFP+ with DMI
SFP+ with DMI
SFP+ with DMI
Temp.
(^oC)
0 to 70
-5 to 85
-40 to 85
RoHS
Compliant
Yes
Yes
Yes
Min
Max
Units
Notes
-40
85
o_C
5
85
%
Non-condensing
0
70
SPS-2340WG
-5
85
o_C
SPS-2340BWG
-40
85
SPS-2340AWG
-0.5
3.6
V
3
dBm
Average power
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2010 V2.0