SPS-23100WG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 10.3 Gb/s / 100 km / 1550 nm Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-23100WG
***********************************************************************************************************************************************************************
SPS-23100WG/SPS-23100BWG/SPS-23100AWG
(RoHS Compliant)
10.3 Gb/s / 100 km / 1550 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Support 9.95 Gbps to 10.5 Gbps
l Complaint with SFP+ MSA
l Compliant to IEEE 802.3ae 10GBASE-ZR/ZW
l SFF-8472 Digital Diagnostic Function
l Temperature-stabilized 1550 nm EML Transmitter
l Distance up to 100 km at SM Fiber
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l Low Power Consumption
l RoHS 6/6 Compliant
l 0 to 70^oC Operating: SPS-23100WG
l -5 to 85^oC Operating: SPS-23100BWG
l -40 to 85^oC Operating: SPS-23100AWG
l Class 1 Laser International Safety Standard IEC-60825
The SPS-23100WG series single mode transceiver is small
form factor pluggable module for bi-directional serial
optical data communications such as IEEE 802.3ae
10GBASE-ZR/ZW and 10G Fibre Channel. It is with the
SFP+ 20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I²C. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1550 nm. A guaranteed minimum optical
link budget of 24 dB is offered which can correspond to a
link distance of over 100 km (assuming worst case fiber loss
of 0.22 dB/km). The transmitter section uses a
temperature-stabilized 1550 nm electrical-modulated laser
(EML) and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
Compliant
section uses an integrated InGaAs avalanche photo detector
preamplifier mounted in an optical header and a limiting
APPLICATIONS
post-amplifier IC.
l 100 km 10G Ethernet
l 100 km OC-192 / STM-64
l 100 km 10G Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
SPS-23100WG
10.3
SPS-23100BWG
10.3
SPS-23100AWG
10.3
10GBASE
ZR / ZW
ZR / ZW
ZR / ZW
Distance
(km)
100
100
100
Wavelength
(nm)
1550 EML
1550 EML
1550 EML
Package
SFP+ with DMI
SFP+ with DMI
SFP+ with DMI
Temp.
(^oC)
0 to 70
-5 to 85
-40 to 85
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Relative Humidity
RH
5
85
%
Non-condensing
Operating Case Temperature
Topr
0
70
o_C
SPS-23100WG
-5
85
SPS-23100BWG
-40
85
SPS-23100AWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Receiver Input Optical Power
Mip
-4
dBm
Average power
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
12/1/2010 V2.0