SPS-2170WG_15 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1310 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-2170WG
***********************************************************************************************************************************************************************
SPS-2170WG
(RoHS Compliant)
10.3 Gb/s / 70 km / 1310 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 10.5 Gb/s Bi-directional Data Links
l Complaint with SFP+ MSA
l Compliant to IEEE 802.3ae 10GBASE
l SFF-8472 Digital Diagnostic Function
l 1310 nm DFB LD Transmitter
l AC/AC Coupling according to MSA
l Distance up to 70 km at SM Fiber
l Single +3.3 V Power Supply
l RoHS 6/6 Compliant
l 0 to 70^oC Operating
l Class 1 Laser International Safety Standard IEC-60825
The SPS-2170WG series single mode transceiver is small
form factor pluggable module for bi-directional serial
optical data communications such as IEEE 802.3ae
10GBASE-LR/LW. It is with the SFP+ 20-pin connector to
allow hot plug capability. Digital diagnostic functions are
available via an I²C. This module is designed for single
mode fiber and operates at a nominal wavelength of 1310
nm. A guaranteed minimum optical link budget of 25 dB is
offered which can correspond to a link distance of over 70
km (assuming worst case fiber loss of 0.35 dB/km) The
transmitter section uses a 1310 nm multiple quantum well
Compliant
DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
APPLICATIONS
section uses an integrated InGaAs detector preamplifier
l High-speed Storage Area Networks
l Computer Cluster Cross-connect
l Custom High-speed Data Pipes
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
SPS-2170WG
10.3
10GBASE
Distance
(km)
70
Wavelength
(nm)
1310 DFB
Package
SFP+ with DMI
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
Power Supply Voltage
Vcc
-0.5
3.6
V
Temp.
(^oC)
0 to 70
RoHS
Compliant
Yes
Notes
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.13
3.3
3.47
Operating Case Temperature
Topr
0
70
Power Supply Current
Data Rate
I_{CC (TX+RX)}
300
350
10.3125
10.5
Units / Notes
V
o_C
mA
Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 2008/10/1 V1.0