SPM-9100G_08 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 850 nm / 2.5 Gbps SFP LC MULTI-MODE TRANSCEIVER

Optoway
1
SPM-9100G
***********************************************************************************************************************************************************************
SPM-9100G
(RoHS Compliant)
3.3V / 850 nm / 2.5 Gbps SFP LC MULTI-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with Fiber Channel FC-PH-2 for
The SPM-9100G series multi-mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet
200-M5-SN-1 and 200-M6-SN-1
l Compliant with IEEE 802.3z Gigabit Ethernet
1000BASE-SX and Fiber Channel FC-PH-2 for
200-M5-SN-1 and 200-M6-SN-1. It is with the SFP 20-pin
1000BASE-SX
l Link Distance at 2.5 Gbd
connector to allow hot plug capability. This module is
designed for multi-mode fiber and operates at a nominal
150 m links with 62.5/125 µm MMF Cables
wavelength of 850 nm. The transmitter section uses a
300 m links with 50/125 µm MMF Cables
l Link Distance at 1.25 Gbd
Vertical Cavity Surface Emitted Laser (VCSEL) and is a
Class 1 laser compliant according to International Safety
300 m links with 62.5/125 µm MMF Cables
Standard IEC 60825. The receiver section uses an
500 m links with 50/125 µm MMF Cables
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l -10 to 85^oC Operation
l Class 1 Laser International Safety Standard IEC 60825
integrated GaAs detector preamplifier (IDP) mounted in an
optical header and a limiting post-amplifier IC.
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
Compliant
1040.11. The transceiver must be operated within the
APPLICATIONS
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength
(Gb/s)
/SDH
(m)
(nm)
Package
SPM-9100G
2.5/1.25
150/300**
850
LC SFP
*: 150 meter for 62.5/125 µm MM fiber; 300 meter for 50/125 µm MM Fiber.
Temp. TX Power RX Sens. RoHS
(^oC) (dBm) (dBm) Compliant
-10 to 85 -4 to -9.5
-15
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
-10
85
o_C
Air flow 1m/sec
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Case Operating Temperature
Topr
Power Supply Current
Data Rate
I_{CC (TX+RX)}
Min
3.1
-10
1000
Typ
3.3
2500
Max
3.5
85
250
Units / Notes
V
o_{C / Air flow 1m/sec}
mA
Mb/s
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
1/1/2008 V2.0