SPM-9100FWG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 850 nm / 2.125 Gbps Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPM-9100FWG
***********************************************************************************************************************************************************************
SPM-9100FWG (RoHS Compliant)
3.3V / 850 nm / 2.125 Gbps Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with Fiber Channel FC-PH-2 for
The SPM-9100FWG series multi-mode transceivers is
small form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet
200-M5-SN-1 and 200-M6-SN-1
l Compliant with IEEE 802.3z Gigabit Ethernet
1000BASE-SX and Fiber Channel FC-PH-2 for
200-M5-SN-1 and 200-M6-SN-1. It is with the SFP 20-pin
1000BASE-SX
l SFF-8472 Digital Diagnostic Function
l Link Distance at 2.125 Gbd
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C series bus specified in the
SFP MSA SFF-8472. This module is designed for
150 m links with 62.5/125 µm MMF Cables
multi-mode fiber and operates at a nominal wavelength of
300 m links with 50/125 µm MMF Cables
l Link Distance at 1.026 Gbd
850 nm. The transmitter section uses a Vertical Cavity
Surface Emitted Laser (VCSEL) and is a Class 1 laser
300 m links with 62.5/125 µm MMF Cables
compliant according to International Safety Standard IEC
500 m links with 50/125 µm MMF Cables
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l -10 to 85^oC Operation
l Class 1 Laser International Safety Standard IEC 60825
60825. The receiver section uses an integrated GaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
Compliant
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
specified temperature and voltage limits. The optical ports
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
Distance Wavelength
(m)
(nm)
Package
SPM-9100FWG 2.125/1.063 200/100 150/300**
850 LC SFP with DMI
*: 150 meter for 62.5/125 µm MM fiber; 300 meter for 50/125 µm MM Fiber.
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm)
(dBm) Compliant
-10 to 85 -4 to -9.5
-15
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
-10
85
o_C
Air flow 1m/sec
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Case Operating Temperature
Topr
Power Supply Current
Data Rate
I_{CC (TX+RX)}
Min
3.1
-10
1000
Typ
3.3
2125
Max
3.5
85
250
Units / Notes
V
o_{C / Air flow 1m/sec}
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
12/1/2005 V2.0