SPM-3102WG_08 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 125 Mbps Digital Diagnostic LC SFP MULTI-MODE TRANSCEIVER

Optoway
1
SPM-3102WG
***********************************************************************************************************************************************************************
SPM-3102WG / SPM-3102BWG / SPM-3102AWG (RoHS Compliant)
3.3V / 1310 nm / 125 Mbps Digital Diagnostic LC SFP MULTI-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l SFF-8472 Digital Diagnostic Function
l 1310 nm Transmitter
l 0 to 2000 m Transmission
l AC/AC Coupling according to MSA
l LV-TTL TX Disable Input Signal
l LV-TTL RX Loss of Signal Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating : SPM-3102WG
l -10 to 85^oC Operating : SPM-3102BWG
l -40 to 85^oC Operating : SPM-3102AWG
l Class 1 Laser International Safety Standard IEC 60825
Compliant
The SPM-3102WG series is small form factor pluggable
module for multi-mode fiber Fast Ethernet and OC-3 /
STM-1 SONET / SDH fiber communications. It is with the
SFP 20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I²C series bus
specified in the SFP MSA SFF-8472. The transmitter
section uses a multiple quantum well 1310 nm laser and is
a class 1 laser compliant according to International Safety
Standard IEC 60825. The receiver section uses an integrated
InGaAs detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC.
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Fast Ethernet Links
l SONET / SDH Equipment Interconnect
l Fiber Channel Links
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
SPM-3102WG
SPM-3102BWG
SPM-3102AWG
Bit Rate
(Mb/s)
125
125
125
Distance
(m)
0 to 2000
0 to 2000
0 to 2000
Wavelength
(nm)
1310
1310
1310
Package
LC SFP with DMI
LC SFP with DMI
LC SFP with DMI
Temp.
(^oC)
0 to 70
-10 to 85
-40 to 85
TX Power
(dBm)
-12 to -19
-12 to -19
-12 to -19
RX Sens.
(dBm)
-30
-30
-30
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Min
Tstg
-40
Topr
0
-10
-40
Max
85
70
85
85
Units
o_C
o_C
Notes
SPM-3102WG
SPM-3102BWG
SPM-3102AWG
Power Supply Voltage
Input Voltage
Vcc
0
3.6
V
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.1
3.3
3. 5
V
Power Supply Current
Operating Temperature
I_{CC (TX+RX)}
150
250
mA
Topr
0
70
o_{C / SPM-3102WG}
-10
85
o_{C / SPM-3102BWG}
-40
85
o_{C / SPM-3102AWG}
Data Rate
125
200
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V2.0