SPM-2101WG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1310 nm / 10.3 Gb/s Digital Diagnostic LC Multi-Mode SFP+ for 10GBASE-LRM

Optoway
1
SPM-2101WG
*********************************************************************************************************************************************************************
SPM-2101WG
(RoHS Compliant)
1310 nm / 10.3 Gb/s Digital Diagnostic LC Multi-Mode SFP+ for 10GBASE-LRM
********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Optical Interface specifications per IEEE 802.3aq
The SPM-2101WG series SFP+ LRM is an optical module
10GBASE-LRM
l Complaint to SFP+ MSA
l Link Distance at 10.3 Gbd
for transmission at 1310 nm over legacy multimode fiber up
to 220 m. It compliant with SFF-8431, SFF-8432, and IEEE
802.3aq 10GBASE-LRM. It is with the SFP+ 20-pin
OM1 MMF Links up to 220 m
OM2 MMF Links up to 220 m
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C. This module is designed
OM3 MMF Links up to 220 m
l SFF-8472 Digital Diagnostic Function
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS 6/6 Compliant
l 0 to 70^oC Operation
l Class 1 Laser International Safety Standard IEC 60825
for multi-mode fiber and operates at a nominal wavelength
of 1310 nm. The transmitter section uses a 1310 nm FP
laser and is a Class 1 laser compliant according to
International Safety Standard IEC 60825. The receiver
section uses an InGaAs linear multimode PIN receiver.
Host board designers using an EDC PHY IC should follow
the IC manufacturer’s recommended setting for
Compliant
interoperating the host board EDC PHY with a linear
receiver SFP+ module.
APPLICATIONS
l 10GBASE-LRM
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
10GBASE
Distance
(m)
Wavelength
(nm)
SPM-2101WG
10.3
LRM
220*
1310
*: 220 m for OM1 MMF, and 220 m for OM2 MMF and 220m for OM3 MMF.
Package
SFP+ with DMI
Temp.
(^oC)
0 to 70
RoHS
Compliant
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
Operating Relative Humidity
RH
5
95
%
Non condensing
Power Supply Voltage
Vcc
0
4
V
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.14
3.3
3.46
Operating Case Temperature
Topr
0
70
Power Supply Current
Power Dissipation
I_{CC (TX+RX)}
P
200
300
1.0
Data Rate
9.95
10.3125
Units / Notes
V
o_C
mA
W
Gb/s
*********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 2008/8/1 V1.0