SPB-9805RWG_2015 Datasheet, PDF (1/6 Pages) Optoway Technology Inc – 3.2 Gb/s Digital Diagnostic Single-Fiber SFP Transceiver

Optoway
1
SPB-9805RWG
***********************************************************************************************************************************************************************
SPB-9805RWG / SPB-9805BRWG / SPB-9805ARWG
(SC BIDI SFP) (RoHS Compliant)
SPB-9805RLWG / SPB-9805BRLWG / SPB-9805ARLWG
(LC BIDI SFP)
1310 nm TX / 1490 nm RX , 3.3V / 3.2 Gb/s Digital Diagnostic Single-Fiber SFP Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Multirate up to 3.2 Gb/s
The SPB-9805RWG series is high performance module for
l 1-Fiber Bi-Directional SFP Optical Transceiver
10GBASE LX-4, Serial ATA/ATA2, SONET OC-48 / SDH
l Simplex SC Connector: SPB-9805RWG
STM-16, Gigabit Ethernet 1000BASE-LX and 1x/2x Fibre
l Simplex LC Connector: SPB-9805RLWG
l SFF-8472 Digital Diagnostic Function
l 1310 nm LD Transmitter
l 1490 nm Receiver
l Distance Up to 5 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: SPB-9805RWG
l -10 to 85^oC Operation: SPB-9805BRWG
l -40 to 85^oC Operation: SPB-9805ARWG
l Class 1 Laser International Safety Standard IEC 60825
Channel single fiber communications by using 1310 nm
transmitter and 1490 nm receiver. It is with the SFP 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C. The transmitter section
uses a multiple quantum well 1310 nm laser and is a class
1 laser compliant according to International Safety Standard
IEC 60825. The receiver section is designed to receive 1490
nm signal. The receiver section uses an integrated 1490 nm
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
l 10GBASE LX-4
l Serial ATA / ATA2
l SONET OC-48 / SDH STM-16
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
ORDER INFORMATION
P/No.
Bit Rate _{Distance TX}
(Gb/s)
(km)
(nm)
RX
(nm)
Package
Temp TX Power RX Sens. RoHS
(^oC)
(dBm) (dBm) Compliant
SPB-9805RWG Multirate*
5
1310 1490 SC SFP with DMI 0 to 70 -3 to -10
-18
Yes
SPB-9805BRWG Multirate*
5
1310 1490 SC SFP with DMI -10 to 85 -3 to -10
-18
Yes
SPB-9805ARWG Multirate*
5
1310 1490 SC SFP with DMI -40 to 85 -3 to -10
-18
Yes
SPB-9805RLWG Multirate*
5
1310 1490 LC SFP with DMI 0 to 70 -3 to -10
-18
Yes
SPB-9805BRLWG Multirate*
5
1310 1490 LC SFP with DMI -10 to 85 -3 to -10
-18
Yes
SPB-9805ARLWG Multirate*
5
1310 1490 LC SFP with DMI -40 to 85 -3 to -10
-18
Yes
Multirate*: 3.185Gb/s, 3.125Gb/s, 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2009 V2.0