SPB-97120W-1590G_2015 Datasheet, PDF (1/6 Pages) Optoway Technology Inc – 2.5 Gbps Digital Diagnostic Single-Fiber SFP Transceiver

Optoway
1
SPB-97120W-1590G
***********************************************************************************************************************************************************************
SPB-97120W-1590G
(SC)
(RoHS Compliant)
SPB-97120LW-1590G
(LC)
1590 nm TX / 1510 nm RX , 3.3V / 2.5 Gbps Digital Diagnostic Single-Fiber SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l 1-Fiber Bi-Directional SFP Optical Transceiver
The SPB-97120W-1590G series is high performance
l Simplex SC Connector: SPB-97120W-1590G
module for OC-48 / STM-16 and Gigabit Ethernet
l Simplex LC Connector: SPB-97120LW-1590G
l Tri-rate for OC-48 / STM-16, Gigabit Ethernet
1000BASE single fiber communications by using 1590 nm
transmitter and 1510 nm receiver. It is with the SFP 20-pin
1000BASE & Fibre Channel
l SFF-8472 Digital Diagnostic Function
l 1590 nm DFB LD Transmitter
l 1510 nm Receiver
l Distance Up to 120 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation
l Class 1 Laser International Safety Standard IEC 60825
connector to allow hot plug capability. Digital diagnostic
functions are available via an I²C. The transmitter section
uses a multiple quantum well 1590 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC 60825. The receiver section is designed to
receive 1510 nm signal. The receiver section uses an
integrated 1510 nm detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
l WDM OC-48 / STM-16 Links
l Gigabit Ethernet Interconnect
l Fibre Channel Links
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _Distance
(Gb/s) _(km)
TX
(nm)
SPB-97120W-1590G
2.5
SPB-97120LW-1590G 2.5
120 1590DFB
120 1590DFB
RX
(nm)
Package
Temp
(^oC)
1510
1510
SC SFP with DMI 0 to 70
LC SFP with DMI 0 to 70
TX
Power
(dBm)
4 to 0
4 to 0
RX Sens. RoHS
(dBm) Compliant
-29
Yes
-29
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Storage Temperature
Tstg
-40
Operating Case Temperature
Topr
0
Max
85
70
Units
o_C
o_C
Notes
Relative Humidity
RH
0
85
%
Non condensing
Power Supply Voltage
Vcc
0
3.6
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Power Supply Current
I_{CC (TX+RX)}
Operating Case Temperature
Topr
0
Data Rate
622
Typ
3.3
200
2488
Max
3.47
300
70
2670
Units / Notes
V
mA
o_C
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 7/1/2008 V1.0