SPB-97120RW-1510G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1510 nm TX / 1590 nm RX , 3.3V / 3.2 Gb/s Digital Diagnostic Single-Fiber SFP Transceiver

Optoway
1
SPB-97120RW-1510G
***********************************************************************************************************************************************************************
SPB-97120RW-1510G
(SC)
(RoHS Compliant)
SPB-97120RLW-1510G (LC)
1510 nm TX / 1590 nm RX , 3.3V / 3.2 Gb/s Digital Diagnostic Single-Fiber SFP Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Multirate up to 3.2 Gb/s
The SPB-97120RW-1510G series is high performance
l 1-Fiber Bi-Directional SFP Optical Transceiver
module for 10GBASE LX-4, Serial ATA/ATA2, SONET
l Simplex SC Connector: SPB-97120RW-1510G
l Simplex LC Connector: SPB-97120RLW-1510G
l SFF-8472 Digital Diagnostic Function
l 1510 nm DFB LD Transmitter
l 1590 nm Receiver
l Distance Up to 120 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation
l Class 1 Laser International Safety Standard IEC 60825
Compliant
OC-48 / SDH STM-16, Gigabit Ethernet 1000BASE-LX
and 1x/2x Fibre Channel single fiber communications by
using 1510 nm transmitter and 1590 nm receiver. It is with
the SFP 20-pin connector to allow hot plug capability.
Digital diagnostic functions are available via an I²C. The
transmitter section uses a multiple quantum well 1510 nm
DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC 60825. The receiver
section is designed to receive 1590 nm signal. The receiver
section uses an integrated 1590 nm detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
APPLICATIONS
l 10GBASE LX-4
l Serial ATA / ATA2
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _Distance
(Gb/s) _(km)
TX
(nm)
RX
(nm)
Package
Temp
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
(dBm)
SPB-97120RW-1510G Multirate* 120 1510DFB 1590 SC SFP with DMI 0 to 70 4 to 0
-28
Yes
SPB-97120RLW-1510G Multirate* 120 1510DFB 1590 LC SFP with DMI 0 to 70 4 to 0
-28
Yes
Multirate*: 3.185Gb/s, 3.125Gb/s, 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Absolute Maximum Ratings
Parameter
Symbol
Min
Storage Temperature
Tstg
-40
Operating Case Temperature
Topr
0
Max
85
70
Units
o_C
o_C
Notes
Relative Humidity
RH
0
85
%
Non condensing
Power Supply Voltage
Vcc
0
3.6
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Power Supply Current
I_{CC (TX+RX)}
Operating Case Temperature
Topr
0
Data Rate
125
Typ
3.3
200
3125
Max
3.47
300
70
3200
Units / Notes
V
mA
o_C
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V1.0