SPB-3680WG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1310 nm TX / 1550 nm RX , 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

Optoway
1
SPB-3680WG
***********************************************************************************************************************************************************************
SPB-3680WG / SPB-3680BWG / SPB-3680LWG / SPB-3680BLWG (RoHS Compliant)
1310 nm TX / 1550 nm RX , 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l 1-Fiber Bi-Directional SFP Optical Transceiver
l Complaint with IEEE 802.3ah 100BASE-BX
l Simplex SC Connector: SPB-3680WG
l Simplex LC Connector: SPB-3680LWG
l SFF-8472 Digital Diagnostic Function
l 1310 nm LD Transmitter
The SPB-3680WG series is small form factor pluggable
module for IEEE 802.3ah 100BASE-BX and OC-3/STM-1
SONET/SDH single fiber communications by using 1310
nm transmitter and 1550 nm receiver. It is with the SFP
20-pin connector to allow hot plug capability. Digital
diagnostic functions are available via an I²C series bus
l 1550 nm Receiver
l Distance Up to 80 km
specified in the SFP MSA SFF-8472. The transmitter
section uses a multiple quantum well 1310 nm laser and is
l AC/AC Coupling according to MSA
a class 1 laser compliant according to International Safety
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating : SPB-3680WG
l -10 to 85^oC Operating : SPB-3680BWG
l Class 1 Laser International Safety Standard IEC 60825
Standard IEC 60825. The receiver section uses an integrated
1550 nm detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
l WDM Fast Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _Distance
(Mb/s)
(km)
TX
(nm)
SPB-3680WG
125/155
80
1310
SPB-3680BWG
125/155
80
1310
SPB-3680LWG
125/155
80
1310
SPB-3680BLWG 125/155
80
1310
RX
(nm)
1550
1550
1550
1550
Package
Temp TX Power
(^oC)
(dBm)
SC SFP with DMI 0 to 70 3 to -2
SC SFP with DMI -10 to 85 3 to -2
LC SFP with DMI 0 to 70 3 to -2
LC SFP with DMI -10 to 85 3 to -2
RX Sens.
(dBm)
-34
-34
-34
-34
RoHS
Compliant
Yes
Yes
Yes
Yes
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 3/1/2006 V3.0