NU-73D74D-PG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V, 1.25 Gbps 1310 nm Burst-Mode TX / 1.25 Gbps 1490 nm Continuous RX 2X5 SFF Package, GE-PON 1000BASE-PX10-U ONU Transceiver

Optoway
1
NU-73D74D-PG
**************************************************************************************************************************************************************************
NU-73D74D-PG / NU-73D74D-RG
(RoHS Compliant)
3.3V, 1.25 Gbps 1310 nm Burst-Mode TX / 1.25 Gbps 1490 nm Continuous RX
2X5 SFF Package, GE-PON 1000BASE-PX10-U ONU Transceiver
*************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Optical Network Unit (ONU) for 1000BASE-PX10-U
l Single-SM Fiber Bi-directional WDM Transceiver with
3W-TRX^TM for the Video-Overlay Application
l 1.25 Gbps / 1310 nm Burst-Mode Transmitter
l 1.25 Gbps / 1490 nm Continuous-Mode Receiver with 2R
NU-73D74D is a transceiver for the optical network unit
(ONU) of GE-PON with 1.25Gbps in downstream and 1.25
Gbps in upstream. The NU-73D74D is high performance
module for single fiber communications by using 1310 nm
burst-mode transmitter and 1490 nm continuous-mode
Output with rejection of 1.55 um video signal
l 0 to 70^oC Operating Temperature
l 2x5 Package with Pigtail : NU-73D74D-PG
l 2x5 Package with Receptacle : NU-73D74D-RG
l 0 to 70^oC Operating
l Single +3.3 V Power Supply
l RoHS Compliant
l LVPECL Differential Inputs and Outputs
l LVTTL TX Laser DC Bias Control
l High Speed Laser DC-Bias Turn-on and Turn-off
l LVTTL RX Signal Detect Output
receiver. The receiver section is equipped with 3W-TRX ^TM to
reject incoming high power 1550 nm video signal, where the
rejection ratio is over 40 dB. The transmitter section uses a
multiple quantum well 1310 nm laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated 1490 nm
detector preamplifier (IDP) mounted in an optical header and
a limiting post-amplifier IC. LVPECL interface is used for
differential inputs and outputs. A LVTTL logic interface
simplifies interface to external circuitry.
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Broadband GE-PON System
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
IEEE
802.3ah
Type
TX
Speed λ
(Gb/s) (nm)
Power
(dBm)
Type
RX
Speed λ
(Gb/s) (nm)
Sens.
(dBm)
Temp.
(^oC)
Package
RoHS
Compliant
NU-73D74D-PG* PX10-U BM
1.25 1310 4 / -1 CNT 1.25 1490 -3 / -26 0 to 70 2X5 SFF Pig.
Yes
NU-73D74D-RG* PX10-U BM
1.25 1310 4 / -1 CNT 1.25 1490 -3 / -26 0 to 70 2X5 SFF Rec.
Yes
NOTE: 1. XX-XXXXXX-PG, SC/PC pigtail with fiber length 50 cm; XX-XXXXXX-RG, SC/PC receptacle.
2. BM: Burst Mode; CNT: Continuous Mode; SFF: Small Form Factor Package.
3. * is 3W-TRX^TM ONU transceiver for Video-overlay PON applications.
4. 3W-TRX^TM is trade-mark co-owned by Optoway Technology Inc. and Zenko Technologies Inc.
***************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2006 V5.0