NU-73C94C-PG Datasheet, PDF (1/6 Pages) Optoway Technology Inc – 3.3V, 1.244 Gbps 1310 nm Burst-Mode TX / 2.488 Gbps 1490 nm Continuous RX 2X5 SFF Package, ITU-T G.984.2 Class C G-PON ONU Transceiver

Optoway
1
NU-73C94C-PG
****************************************************************************************************************************************************************************
NU-73C94C-PG
(RoHS Compliant)
3.3V, 1.244 Gbps 1310 nm Burst-Mode TX / 2.488 Gbps 1490 nm Continuous RX
2X5 SFF Package, ITU-T G.984.2 Class C G-PON ONU Transceiver
***************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Class C Optical Network Unit (ONU) for ITU-T G.984.2
NU-73C94C series is a transceiver for the optical network unit
Gigabit-capable PON
l Single-SM Fiber Bi-directional WDM Transceiver
l 1.244 Gbps / 1310 nm Burst-Mode Transmitter
l 2.488 Gbps / 1490 nm Continuous-Mode Receiver with 2R
(ONU) of G-PON with 2.488 Gbps in downstream and 1.244
Gbps in upstream. The NU-73C94C is high performance
module for single fiber communications by using 1310 nm
burst-mode transmitter and 1490 nm continuous-mode
Output
l 2x5 Package with SC/PC Pigtail
l 0 to 70^oC Operating
l Single +3.3 V Power Supply
l RoHS Compliant
l DC Coupled Input Interface
l AC Coupled Output Interface
l LVTTL TX Burst Enable Control
l LVTTL RX Signal Detect Output
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
receiver. The transmitter section uses a multiple quantum well
1310 nm laser and is a class 1 laser compliant according to
International Safety Standard IEC 60825. The receiver section
uses an integrated 1490 nm detector preamplifier (IDP)
mounted in an optical header and a limiting post-amplifier IC.
LVPECL interface is used for differential inputs and outputs.
A LVTTL logic interface simplifies interface to external
circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Broadband G-PON System
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
TX
RX
Temp
P/No
Class Type Speed λ (nm) Power Type Speed λ (nm) Sens. (^oC) Package
(Gb/s)
(dBm)
(Gb/s)
(dBm)
NU-73C94C-PG C BM 1.244 1310 DFB 7 / 2 CNT, 2R 2.488 1490 -8 / -28 0 to 70 SFF 2X5 Pig.
NOTE: 1. NU-XXXXXX-P2, SC/PC pigtail with fiber length 50 cm.
2. BM: Burst Mode; CNT: Continuous Mode; SFF: Small Form Factor Package.
RoHS
Complaint
Yes
*****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
1/1/2006 V4.0