NU-33B54B-K Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 155 Mbps 1310 nm Burst Mode TX / 622 Mbps 1490 nm Continuous-Mode RX 3.3V, 2X5 SFF Package

Optoway
1
NU-33B54B-R/-P
***********************************************************************************************************************************************************************
NU-33B54B-R / NU-33B54B-P / NU-33B54B-R / NU-33B54B-P
155 Mbps 1310 nm Burst Mode TX / 622 Mbps 1490 nm Continuous-Mode RX
3.3V, 2X5 SFF Package, Class B B-PON ONU Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Optical Network Unit (ONU) for ITU-T G.983.3 Class B _{NU-33B54B series is optical network unit (ONU) for ITU-T}
B-PON
l 1-Fiber Bi-directional WDM SM Transceiver
l 155 Mbps / 1310 nm Burst-Mode Transmitter
l 622 Mbps / 1490 nm Continuous-Mode Receiver with 2R
G.983.3 B-PON with 622 Mbps in downstream and 155
Mbps in upstream. The NU-33B54B series is high
performance module for Point-to-Multi-Point (M2MP)
system by using 1310 nm burst-mode transmitter and 1490
Output
l 2x5 Package with SC Receptacle: NU-33B54B-R
l 2x5 Package with SC/PC Pigtail: NU-33B54B-P
l 0 to 70^oC Operating Temperature: NU-33B54B-R
l -40 to 85^oC Operating Temperature: NU-33B54B-R-A
l Single +3.3 V Power Supply
l LVPECL Differential Inputs and Outputs
l LVTTL TX Shutdown Input
l LVTTL RX Loss Signal Output
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
nm continuous-mode receiver. The transmitter section uses
a 1310 nm multiple quantum well laser and is a class 1 laser
compliant according to International Safety Standard IEC
60825. The receiver section uses an integrated 1490 nm /
1550 nm detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC. LVPECL interface
is used for differential inputs and outputs. A LVTTL logic
interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Fast Ethernet PON System
l Broadband PON System
l ATM PON System
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
TX
RX
Type Speed λ (nm)
(Mb/s)
Power
(dBm)
Type Speed
(Mb/s)
λ (nm)
Temp.
Sens. Sat.
(dBm) (dBm)
(^oC)
PIN
Package
NU-33B54B-R
BM
155
1310 2 to -4 CNT, 2R 622 1490/1550 -29
-5
0 to 70
2X5 SFF Rec.
NU-33B54B-R-A BM
155
1310 2 to -4 CNT, 2R 622 1490/1550 -29
-5 -40 to 85 2X5 SFF Rec.
NU-33B54B-P
BM
155
1310 2 to -4 CNT, 2R 622 1490/1550 -29
-5
0 to 70
2X5 SFF Pig.
NU-33B54B-P-A BM
155
1310 2 to -4 CNT, 2R 622 1490/1550 -29
-5 -40 to 85 2X5 SFF Pig.
NOTE: 1. XX-XXXXXX-K, K=R, SC RECEPTACLE, K=P, SC/PC PIGTAIL WITH FIBER LENGTH 50 CM.
3. BM: Burst Mode; CNT: Continuous Mode; SFF: Small Form Factor Package.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2004 V3.0