GBS-9040FG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 5V / 1310 nm / 2.125 Gb/s Signle-Mode Gigabit Interface Converter (GBIC)

Optoway
1
GBS-9040FG
***********************************************************************************************************************************************************************
GBS-9040FG
(RoHS Compliant)
5V / 1310 nm / 2.125 Gb/s Signle-Mode Gigabit Interface Converter (GBIC)
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 2.5 Gbps Bi-directional Data Links
The GBS-9040FG series optical transceivers meet the Gigabit
l Compliant with 1X / 2X Fibre Channel FC-PI 13.0
Interface Converter (GBIC) specification Rev. 5.5. It satisfies the
l Compliant with Gigabit Interface Converter (GBIC)
optical interface specifications defined in IEEE 802.3z Drift 5.0
Specification Rev. 5.5
1000 BASE-LX for Gigabit Ethernet and 1x / 2x Fibre Channel
l 1310 nm DFB Laser Transmitter
FC-PI 13.0. This module is designed for single-mode fiber and
l 23 dB Power Budget at Least
operates at a nominal wavelength of 1310 nm. A guaranteed
l Hot Pluggable module with Duplex SC Connector
minimum optical link budget of 23 dB is offered which can
l Multi-rate Operation for 2.5 / 2.125 / 1.062 / 1.25 Gbps
correspond to a link distance of over 40 km (assuming worst
l Link Distance up to 40 km
l SCA-2 Host Connector
case fiber loss of 0.45 dB/km). The transmitter section uses a
multiple quantum well 1310 nm DFB laser and is a class 1 laser
l Single +5 V Power Supply
l RoHS Compliant
l Differential PECL Inputs and Outputs
compliant according to International Safety Standard IEC 60825.
The receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a limiting
l TTL RX-LOS Output
post-amplifier IC. A PECL input / output logic interface is used.
l Class 1 Laser International Safety Standard IEC 60825
TTL RX-LOS output simplifies interface to external circuitry. A
Compliant
20-pin SCA-2 host connector is used to connect the converter to
the host system.
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l Data Storage
l Dual Rate 1.06 / 2.125 Gb/s Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies
with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The
transceiver must be operated within the specified temperature and
voltage limits. The optical ports of the module shall be terminated
with an optical connector or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
GBS-9040F 2.125/1.063 200/100
Distance Wavelength Package
(km)
(nm)
40
1310 SC GBIC
Temp.
(^oC)
0 to 70
TX Power RX Sens. RoHS
(dBm)
(dBm) Compliant
5 to 0
-23
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
Vcc
---
Min
Max
Units
-40
85
o_C
-5
70
o_C
-0.5
6
V
-0.5
Vcc
V
Notes
Air flow 1m/sec
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Symbol
Vcc
I_TX + I_RX
Operating Temperature
Topr
Data Rate
Fiber Length on 9/125 µm SMF
Min
Typ
Max
4.75
5
5.25
200
300
0
70
1.0625 / 1.25 2.5
2.125 / 2.5
40
Units
V
mA
o_C
Gb/s
km
Conditions
Reference to GND.
Air flow 1m/sec
@1.0625 /2.125 Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0