GBS-72160G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 5V / 1550 nm / 1.25 Gbps Single-Mode Gigabit Interface Converter (GBIC)

Optoway
1
GBS-72160G
***********************************************************************************************************************************************************************
GBS-72160G
(RoHS Compliant)
5V / 1550 nm / 1.25 Gbps Single-Mode Gigabit Interface Converter (GBIC)
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Compliant with Gigabit Interface Converter (GBIC)
The GBS-72160G series optical transceivers meet the
Specification Rev. 5.5
l Compliant with IEEE-802.3z / D5.0 Gigabit Ethernet
Gigabit Interface Converter (GBIC) specification Rev. 5.5.
It satisfies the optical interface specifications defined in
1000 BASE-ZX
l 160 km using Single-mode Optic Cable
l 1550 nm DFB Transmitter
l APD High Sensitivity Receiver
l 36 dB Power Budget at Least
l Hot Pluggable Module with Duplex SC Connector
l SCA-2 Host Connector
l Single +5 V Power Supply
l RoHS Compliant
l Differential PECL Inputs and Outputs
l TTL RX-LOS Output
l Class 1 Laser International Safety Standard IEC-60825
IEEE 802.3z Drift 5.0 for Gigabit Ethernet. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1550 nm. A guaranteed minimum optical
link budget of 36 dB is offered which can correspond to a
link distance of over 160 km (assuming worst case fiber loss
of 0.2 dB/km). The transmitter section uses a multiple
quantum well 1550 nm DFB laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
Avalanche photodetector preamplifier mounted in an
optical header and a limiting post-amplifier IC. A PECL
input / output logic interface is used. TTL RX-LOS output
Compliant
simplifies interface to external circuitry. A 20-pin SCA-2
host connector is used to connect the converter to the host
APPLICATIONS
system.
l Switch to Switch Interface
l High Speed Interface for File Servers
l Bus Extension Application
l Data Storage
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
GBS-72160G
1.25
1000
BASE
Distance Wavelength Package
(km)
(nm)
160 1550 DFB SC GBIC
Temp.
(^oC)
0 to 70
TX Power RX Sens. RoHS
(dBm) (dBm) Compliant
5 to 2
-34
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Min
Max
Units
Tstg
-40
85
o_C
Topr
-5
70
o_C
Power Supply Voltage
Vcc
-0.5
6
V
Input Voltage
---
-0.5
Vcc
V
Relative Humidity
RH
5
95
%
Notes
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
4.75
5
5.25
Power Supply Current
Operating Temperature
I_TX + I_RX
Topr
0
200
300
70
Data Rate
1000
1250
Units
V
mA
o_C
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 7/1/2007 V1.0