GBM-9000FG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter (GBIC)

Optoway
1
GBM-9000FG
***********************************************************************************************************************************************************************
GBM-9000FG
(RoHS Compliant)
5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter (GBIC)
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 2.5 Gbps Bi-directional Data Links
l Compliant with 1X / 2X Fibre Channel FC-PI 13.0
l Compliant with Gigabit Interface Converter (GBIC)
Specification Rev. 5.5
l 850 nm VCSEL Laser Transmitter
l Hot Pluggable module with Duplex SC Connector
l Multi-rate Operation for 2.5 / 2.125 / 1.062 / 1.25 Gbps
l Link Distance at 2.125 Gbd
150 m links with 62.5/125 µm MMF Cables
300 m links with 50/125 µm MMF Cables
l Link Distance at 1.026 Gbd
The GBM-9000FG series optical transceivers meet the Gigabit
Interface Converter (GBIC) specification Rev. 5.5. It satisfies the
optical interface specifications defined in IEEE 802.3z Drift 5.0
1000 BASE-SX for Gigabit Ethernet and 1x / 2x Fibre Channel
FC-PI 13.0. This module is designed for multi-mode fiber and
operates at a nominal wavelength of 850 nm. The transmitter
section uses a multiple quantum well VCSEL and is a class 1
laser compliant according to International Safety Standard IEC-
60825. The receiver section uses an integrated GaAs detector
preamplifier (IDP) mounted in an optical header and a limiting
300 m links with 62.5/125 µm MMF Cables
post-amplifier IC. A PECL input / output logic interface is used.
550 m links with 50/125 µm MMF Cables
l SCA-2 Host Connector
l Single +5 V Power Supply
l RoHS Compliant
l Differential PECL Inputs and Outputs
l TTL RX-LOS Output
l Class 1 Laser International Safety Standard IEC-60825
Compliant
TTL RX-LOS output simplifies interface to external circuitry. A
20-pin SCA-2 host connector is used to connect the converter to
the host system.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies
with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The
transceiver must be operated within the specified temperature and
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
voltage limits. The optical ports of the module shall be terminated
with an optical connector or with a dust plug.
l Data Storage
l Dual Rate 1.06 / 2.125 Gb/s Fibre Channel
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
Distance Wavelength Package
(m)
(nm)
Temp.
(^oC)
TX Power
(dBm)
GBM-9000FG 2.125/1.063 2x/1x 150/300*
850
SC GBIC 0 to 70 -4 to -9.5
* At 2.125Gb/s: 150 m using 62.5 µm MMF optic cable; 300 m using 50 µm MMF optic cable
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Power Supply Voltage
Input Voltage
Symbol
Min
Max
Units
Tstg
-40
85
o_C
Topr
-5
70
o_C
Vcc
-0.5
6
V
---
-0.5
Vcc
V
RX Sens. RoHS
(dBm) Compliant
-17
Yes
Notes
Air flow 1m/sec
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Symbol
Vcc
I_TX + I_RX
Operating Temperature
Topr
Data Rate
Fiber Length on 50/125 µm
500MHz-km Fiber
Fiber Length on 62.5/125 µm
200MHz-km Fiber
Min
Typ
Max
4.75
5
5.25
200
300
0
70
1.0625 / 1.25 2.5
2.125 / 2.5
550
300
300
150
Units
V
mA
o_C
Gb/s
m
m
Conditions
Reference to GND.
Air flow 1m/sec
@1.0625 Gb/s
@2.125Gb/s
@1.0625 Gb/s
@2.125Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0