BTRS-9705G_09 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1550 nm TX / 1310 nm RX , 3.3V / 2.5 Gbps RoHS Compliant Single-FiberWDM Transceiver

Optoway
1
BTRS-9705G
**********************************************************************************************************************************************************************
BTRS-9705G / BTRS-9705-SPG / BTRS-9705AG / BTRS-9705A-SPG
1550 nm TX / 1310 nm RX , 3.3V / 2.5 Gbps RoHS Compliant Single-Fiber WDM Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber WDM Transceiver
l Speed up to 2.67 Gbps
l 1550 nm LD Transmitter
l 1310 nm Receiver
l Distance Up to 5 km for 2.5 Gbps
l Distance up to 10 km for 2x/1x Fibre Channel &
The BTRS-9705G series is high performance module for
single fiber communications by using 1550 nm transmitter
and 1310 nm receiver. The transmitter section uses a
multiple quantum well 1550 nm laser and is a class 1 laser
compliant according to International Safety Standard IEC
60825. The receiver section uses an integrated 1310 nm
1000BASE
l Single +3.3 V Power Supply
l RoHS Compliant
l PECL Differential Inputs and Outputs
l LVTTL Signal Detect Output
l 0 to 70^oC Operating Temperature: BTRS-9705G
l -20 to 85^oC Operating Temperature: BTRS-9705AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry. LV-TTL Signal
Detect is used.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
APPLICATIONS
l WDM OC-48 / STM-16 Links
l SONET/SDH Equipment Interconnect
l Fibre Channel Links
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Speed
(Gb/s)
Distance
(km)
TX
(nm)
RX
(nm)
Voltage
(V)
BTRS-9705G 2.5 / 1.25 5 / 10* 1550 DFB 1310
3.3
BTRS-9705AG 2.5 / 1.25 5 / 10* 1550 DFB 1310
3.3
Note: 5 km for OC-48, 10 km for 1x/2x Fibre Channel and Gigabit Ethernet.
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Storage Temperature
Tstg
-40
85
Operating Temperature
Topr
0
70
-20
85
Soldering Temperature
---
260
Power Supply Voltage
Vcc
0
3.6
Input Voltage
---
GND
Vcc
Output Current
Iout
0
30
Package
2X5 SC
2X5 SC
Units
o_C
o_C
o_C
V
V
mA
Temp
(^oC)
0 to 70
-20 to 85
TX
Power
(dBm)
-3 to -9
-3 to -9
RX Sens.
(dBm)
-18
-18
Notes
BTRS-9705G/Air flow 1m/sec
BTRS-9705AG/Air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.13
3.3
3.47
Power supply Current
Operating Temperature
Icc,_TX+Icc,_RX
Topr
0
200
260
70
-20
85
Data Rate
0.622
2.488
2.67
Units / Notes
V
mA
o_{C / BTRS-9705G}
o_{C / BTRS-9705AG}
air flow 1m/sec
Gb/s
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
10/1/2009 V2.0