BTRS-7960CG_09 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1490 nm TX/ 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTRS-7960CG
***********************************************************************************************************************************************************************
BTRS-7960CG / BTRS-7960C-SPG / BTRS-7960ACG / BTRS-7960AC-SPG
1490 nm TX/ 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Bi-Directional Single-Fiber 3W-TRX^TM Transceiver
The BTRS-7960CG series is high performance module for
l Compliant with IEEE 802.3ah 1000BASE-BX
l 1490 nm DFB LD Transmitter
single fiber communications by using 1490 nm transmitter
and 1310 nm receiver. The transmitter section uses a
l 1310 nm Receiver
multiple quantum well 1490 nm DFB laser and is a class 1
l Link distance up to 60 km
l Single +3.3 V Power Supply
l RoHS Compliant
l LVPECL Differential Inputs and Outputs
l LVTTL Signal Detect Output
l 0 to 70^oC Operating: BTRS-7960CG
laser compliant according to International Safety Standard
IEC-60825. The receiver section is designed to receive 1310
nm and block 1490 nm signal. This feature is suitable for
IEEE 802.3ah 1000BASE-BX and ITU-T 983.3 application.
A PECL logic interface simplifies interface to external
circuitry. LVTTL signal Detect is used.
l -20 to 85^oC Operating: BTRS-7960ACG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l WDM Gigabit Ethernet Links
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
l SONET/SDH Equipment Interconnect
with a dust plug.
l Fiber Channel Links
ORDER INFORMATION
P/No.
IEEE ^{Bit Rate} Distance
802.3ah ^(Gb/s) (km)
TX
(nm)
RX Voltage Package
(nm) (V)
Temp
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
1000BASE
(dBm)
BTRS-7960CG
BX
1.25
60
1490 DFB 1310
3.3
SC, 2X5 0 to 70 2 to -3 -26
Yes
BTRS-7960ACG
BX
1.25
60
1490 DFB 1310
3.3
SC, 2X5 0 to 70 2 to -3 -26
Yes
Note: 1. BTRS-XXXXXG is SC/PC receptacle type package with standard case
2. BTRS-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
---
Power Supply Voltage
Vcc
Input Voltage
---
Output Current
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
3.6
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
BTRS-7960CG
BTRS-7960ACG
air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Operating Temperature
Topr
0
Typ
Max
3.3
3.47
70
Units / Notes
V
o_{C / BTRS-7960CG}
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2009 V3.0