BTRS-7940CG_09 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1490 nm TX/ 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTRS-7940CG
***********************************************************************************************************************************************************************
BTRS-7940CG / BTRS-7940C-SPG / BTRS-7940ACG / BTRS-7940AC-SPG
1490 nm TX/ 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Bi-Directional Single-Fiber Transceiver
l Compliant with IEEE 802.3ah 1000BASE-BX
l 1490 nm DFB LD Transmitter
l 1310 nm Receiver
l 20 dB Power Budget At Least
l Link distance up to 40 km
l Single +3.3 V Power Supply
l RoHS Compliant
l LVPECL Differential Inputs and Outputs
l LVTTL Signal Detect Output
l 0 to 70^oC Operating: BTRS-7940CG
l -20 to 85^oC Operating: BTRS-7940ACG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
The BTRS-7940CG series is high performance module for
single fiber communications by using 1490 nm transmitter
and 1310 nm receiver. The transmitter section uses a
multiple quantum well 1490 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section is designed to receive 1310
nm and block 1490 nm signal. This feature is suitable for
IEEE 802.3ah 1000BASE-BX and ITU-T 983.3 application.
A PECL logic interface simplifies interface to external
circuitry. LVTTL signal Detect is used.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
IEEE ^{Bit Rate} Distance
802.3ah ^(Gb/s) (km)
1000BASE
TX
(nm)
RX Voltage Package
(nm) (V)
Temp
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
(dBm)
BTRS-7940CG
BX
1.25
40
1490 DFB 1310
3.3
SC, 2X5 0 to 70 2 to -3 -23
Yes
BTRS-7940ACG
BX
1.25
40
1490 DFB 1310
3.3
SC, 2X5 -20 to 85 2 to -3 -23
Yes
Note: 1. BTRS-XXXXXG is SC/PC receptacle type package with standard case
2. BTRS-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
---
Power Supply Voltage
Vcc
Input Voltage
---
Output Current
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
3.6
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
BTRS-7940CG
BTRS-7940ACG
air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / BTRS-7940CG}
-20
85
o_{C / BTRS-7940ACG}
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2009 V3.0