BTRS-7910CG_09 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1490 nm TX/ 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTRS-7910CG
***********************************************************************************************************************************************************************
BTRS-7910CG / BTRS-7910C-SPG / BTRS-7910ACG / BTRS-7910AC-SPG
1490 nm TX/ 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Bi-Directional Single-Fiber Transceiver
The BTRS-7910CG series is high performance module for
l Compliant with IEEE 802.3ah 1000BASE-BX10
l 1490 nm DFB LD Transmitter
single fiber communications by using 1490 nm transmitter
and 1310 nm receiver. The transmitter section uses a
l 1310 nm Receiver
multiple quantum well laser and is a class 1 laser compliant
l Link distance up to 10 km
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: BTRS-7910CG
l -20 to 85^oC Operating: BTRS-7910ACG
l LVPECL Differential Inputs and Outputs
according to International Safety Standard IEC-60825. The
receiver section is designed to receive 1310 nm and block
1490 nm signal. This feature is suitable for IEEE 802.3ah
1000BASE-BX and ITU-T 983.3 application. A PECL logic
interface simplifies interface to external circuitry. LVTTL
signal Detect is used.
l LVTTL Signal Detect Output
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l WDM Gigabit Ethernet Links
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
l SONET/SDH Equipment Interconnect
with a dust plug.
l Fiber Channel Links
ORDER INFORMATION
P/No.
IEEE ^{Bit Rate} Distance
802.3ah ^(Gb/s) (km)
TX
(nm)
RX Voltage Package
(nm) (V)
Temp
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
1000BASE
(dBm)
BTRS-7910CG
BX10 1.25
10
1490 DFB 1310
3.3
SC, 2X5 0 to 70 -3 to -9 -20
Yes
BTRS-7910ACG BX10 1.25
10
1490 DFB 1310
3.3
SC, 2X5 -20 to 85 -3 to -9 -20
Yes
Note: 1. BTRS-XXXXXG is SC/PC receptacle type package with standard case
2. BTRS-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
3.6
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
BTRS-7910CG
BTRS-7910ACG/air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / BTRS-7910CG}
-20
85
o_{C / BTRS-7910ACG}
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2009 V3.0