BTRS-7810CG_09 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1310 nm TX/ 1490 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTRS-7810CG
***********************************************************************************************************************************************************************
BTRS-7810CG / BTRS-7810C-SPG / BTRS-7810ACG / BTRS-7810AC-SPG
1310 nm TX/ 1490 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Bi-Directional Single-Fiber Transceiver
l Compliant with IEEE 802.3ah 1000BASE-BX10
l 1310 nm LD Transmitter
l 1490 nm Receiver
l 1550 nm Enhanced Band Block
l Link distance up to 10 km
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: BTRS-7810CG
l -20 to 85^oC Operating: BTRS-7810ACG
l LVPECL Differential Inputs and Outputs
l LVTTL Signal Detect Output
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
The BTRS-7810CG series is high performance module for
single fiber communications by using 1310 nm transmitter
and 1490 nm receiver. This module is equipped with
3W-TRX^TM OE device to reject 1.55 um high power
video signal. The transmitter section uses a multiple
quantum well laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section is designed to receive 1490 nm and block
1550 nm signal. This feature is suitable for IEEE 802.3ah
1000BASE-BX10 and ITU-T 983.3 application. The
receiver section uses an integrated 1490 nm detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
Compliant
APPLICATIONS
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
ORDER INFORMATION
P/No.
IEEE ^{Bit Rate} Distance TX
802.3ah ^(Gb/s) (km) (nm)
RX
(nm)
Voltage Package
(V)
Temp
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
1000BASE
(dBm)
BTRS-7810CG
BX10
1.25
10
1310 1490
3.3
SC, 2X5 0 to 70 -3 to -9 -20
Yes
BTRS-7810ACG BX10
1.25
10
1310 1490
3.3
SC, 2X5 -20 to 85 -3 to -9 -20
Yes
Note: 1. BTRS-XXXXXG is SC/PC receptacle type package with standard case
2. BTRS-XXXXXEG is SC/PC eceptacle type package with extended case
3. BTRS-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
3.6
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
BTRS-7810CG
BTRS-7810ACG/air flow 1m/sec
10 seconds on leads only
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2009 V3.0