BTRS-7760CG_09 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1550 nm TX / 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTRS-7760CG
***********************************************************************************************************************************************************************
BTRS-7760CG / BTRS-7760C-SPG / BTRS-7760ACG / BTRS-7760AC-SPG
1550 nm TX / 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional Transceiver
l Speed up to 1300 Mbps
The BTRS-7760CG series is high performance module for
single fiber communications by using 1550 nm transmitter
l 1550 nm DFB LD Transmitter
and 1310 nm receiver. The transmitter section uses a
l 1310 nm Receiver
l Distance Up to 60 km
multiple quantum well 1550 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
l Single +3.3 V Power Supply
l RoHS Compliant
l LVTTL Signal Detect Output
l PECL Differential Inputs and Outputs
l 0 to 70^oC Operating: BTRS-7760CG
l -20 to 85^oC Operating: BTRS-7760ACG
IEC-60825. The receiver section uses an integrated 1310
nm detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC. A PECL logic
interface simplifies interface to external circuitry. LV-TTL
Signal Detect is used.
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
l WDM Gigabit Ethernet Links
of the module shall be terminated with an optical connector
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _Distance
(Gb/s) _(km)
TX
(nm)
RX
(nm)
Voltage Package Temp
(V)
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
(dBm)
BTRS-7760CG
1.25
60
1550 DFB 1310
3.3 SC, 2X5 0 to 70 2 to -3 -26
Yes
BTRS-7760ACG
1.25
60
1550 DFB 1310
3.3 SC, 2X5 -20 to 85 2 to -3 -26
Yes
Note: 1. BTRS-XXXXXG is SFF SC receptacle type package.
2. BTRS-XXXXX-APBBBG is SFF pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Tstg
-40
Topr
0
-20
---
Max
85
70
85
260
Units
o_C
o_C
o_C
Notes
BTRS-7760CG
BTRS-7760ACG
air flow 1m/sec
10 seconds on leads only
Power Supply Voltage
Vcc
0
3.6
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Operating Temperature
Topr
0
-20
Data Rate
Power Supply Current
Icc
Typ
3.3
1250
Max
3.47
70
85
1300
280
Units / Notes
V
o_{C / BTRS-7760CG}
o_{C / BTRS-7760ACG}
air flow 1m/sec
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2009 V3.0