BTRS-7700MG_09 Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 1550 nm TX / 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-FiberMM Transceiver

Optoway
1
BTRS-7700MG
***********************************************************************************************************************************************************************
BTRS-7700MG / BTRS-7700CMG / BTRS-7700AMG / BTRS-7700ACMG
1550 nm TX / 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber MM Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional MMTransceiver
l 1550 nm Transmitter
l 1310 nm Receiver
l Distance 0 to 500 m
l 0 to 70^oC Operating: BTRS-7700MG
l -20 to 85^oC Operating: BTRS-7700AMG
l Speed up to 1300 Mbps
l 2x5 Package with SC Receptacle
l LVTTL Signal Detect Output : BTRS-7700CMG
l LVPECL Signal Detect Output : BTRS-7700MG
l Single +3.3 V Power Supply
l RoHS Compliant
l PECL Differential Inputs and Outputs
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
The BTRS-7700MG series is high performance module for
multi-mode single fiber communications by using 1550 nm
transmitter and 1310 nm receiver. The transmitter section
uses a multiple quantum well laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated 1310
nm detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC. A PECL logic
interface simplifies interface to external circuitry. LV-TTL
Signal Detect is used.
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
APPLICATIONS
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _{Distance TX}
(Gb/s)
(m)
(nm)
RX
(nm)
Voltage Package Temp
(V)
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
(dBm)
BTRS-7700MG
1.25 0 to 500 1550 1310
3.3 SC, 2X5 0 to 70 -4 to -10 -17
Yes
BTRS-7700AMG
1.25 0 to 500 1550 1310
3.3 SC, 2X5 -20 to 85 -4 to -10 -17
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
---
Power Supply Voltage
Vcc
Input Voltage
---
Output Current
Iout
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
-40
0
-20
0
GND
0
Min
3.13
0
-20
Max
85
70
85
260
3.6
Vcc
30
Typ
3.3
1250
Units
o_C
o_C
o_C
V
V
mA
Notes
BTRS-7700MG
BTRS-7700AMG
10 seconds on leads only
Max
3.47
70
85
1300
260
Units / Notes
V
o_{C / BTRS-7700MG}
o_{C / BTRS-7700AMG}
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2009 V3.0