BTRS-7660CG_09 Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTRS-7660CG
***********************************************************************************************************************************************************************
BTRS-7660CG / BTRS-7660C-SPG / BTRS-7660ACG / BTRS-7660AC-SPG
1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional Transceiver
l Speed up to 1300 Mbps
The BTRS-7660CG series is high performance module for
single fiber communications by using 1310 nm transmitter
l 1310 nm DFB LD Transmitter
and 1550 nm receiver. The transmitter section uses a
l 1550 nm Receiver
l Distance Up to 60 km
multiple quantum well 1310 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
l 20 dB Link Power Budget At Least
l Single +3.3 V Power Supply
l RoHS Compliant
l LVTTL Signal Detect Output
l PECL Differential Inputs and Outputs
l 0 to 70^oC Operating: BTRS-7660CG
IEC 60825. The receiver section uses an integrated 1550 nm
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry. LV-TTL Signal
Detect is used.
l -20 to 85^oC Operating: BTRS-7660ACG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
with a dust plug.
l Fibre Channel Links
ORDER INFORMATION
P/No.
Bit Rate _Distance
(Gb/s) _(km)
TX
(nm)
RX
(nm)
Voltage Package Temp
(V)
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
(dBm)
BTRS-7660CG
1.25
40 1310 DFB 1550
3.3 SC, 2X5 0 to 70 4 to -1 -26
Yes
BTRS-7660ACG
1.25
40 1310 DFB 1550
3.3 SC, 2X5 -20 to 85 4 to -1 -26
Yes
Note: 1. BTRS-XXXXXG is SFF SC receptacle type package.
2. BTRS-XXXXX-APBBBG is SFF pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Tstg
-40
Topr
0
-20
---
Max
85
70
85
260
Units
o_C
o_C
o_C
Notes
BTRS-7660CG/Air flow 1m/sec
BTRS-7660ACG/Air flow 1m/sec
10 seconds on leads only
Power Supply Voltage
Vcc
0
3.6
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Operating Temperature
Topr
0
-20
Data Rate
Power Supply Current
Icc
Typ
3.3
1250
Max
3.47
70
85
1300
280
Units / Notes
V
o_{C / BTRS-7660CG}
o_{C / BTRS-7660ACG}
air flow 1m/sec
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2009 V3.0