BTRS-7610CG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTRS-7610CG
***********************************************************************************************************************************************************************
BTRS-7610CG / BTRS-7610ACG
1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional SFF Transceiver
l 1310 nm Transmitter
l 1550 nm Receiver
l Distance Up to 10 km
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: BRS-7610CG
l -20 to 85^oC Operating: BRS-7610ACG
l Speed up to 1300 Mbps
l LVTTL Signal Detect Output
l PECL Differential Inputs and Outputs
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
The BTRS-7610CG series is high performance module for
single fiber communications by using 1310 nm transmitter
and 1550 nm receiver. The transmitter section uses a
multiple quantum well laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated 1550 nm detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry. LV-TTL Signal
Detect is used.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _{Distance TX}
(Gb/s) _(km)
(nm)
RX
(nm)
Voltage Package Temp
(V)
(^oC)
TX RX Sens. RoHS
Power (dBm) Compliant
(dBm)
BTRS-7610CG
1.25
10
1310 1550
3.3 SC, 2X5 0 to 70 -3 to -9 -20
Yes
BTRS-7610ACG
1.25
10
1310 1550
3.3 SC, 2X5 -20 to 85 -3 to -9 -20
Yes
Note: 1. BTRS-XXXXXG is SFF SC receptacle type package.
2. BTRS-XXXXX-APBBBG is SFF pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Tstg
-40
Topr
0
-20
---
Max
85
70
85
260
Units
o_C
o_C
o_C
Notes
BTRS-7610CG
BTRS-7610ACG/air flow 1m/sec
10 seconds on leads only
Power Supply Voltage
Input Voltage
Vcc
0
3.6
V
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / BTRS-7610CG}
-20
85
o_{C / BTRS-7610ACG}
Data Rate
1250
1300
Mb/s
Power Supply Current
Icc
260
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V2.0