BTR-5840G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 1310 nm TX / 1490 nm RX , 3.3V / 155 Mbps

Optoway
1
BTR-5840G
***********************************************************************************************************************************************************************
BTR-5840G / BTR-5840-SPG
1310 nm TX / 1490 nm RX , 3.3V / 155 Mbps
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional Transceiver
l 1310 nm LD Transmitter
The BTR-5840G series is high performance module for
single fiber communications by using 1310 nm transmitter
l 1490 nm Receiver
and 1490 nm receiver. This module is equipped with
l 1550 nm Video Block
l Distance Up to 40 km
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
l RoHS Compliant
l LVPECL Differential Inputs and Outputs
3W-TRX^TM OE device to reject 1.55 um high power
video signal. The transmitter section uses a multiple
quantum well 1310 nm laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated 1490 nm detector
preamplifier (IDP) mounted in an optical header and a
l 0 to 70^oC Operating
l Wave Solderable and Aqueous Washable
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
APPLICATIONS
l WDM 155/622 Mb/s Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 532 Mb/s Links
l CATV
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _{Distance TX}
(Mb/s) _(km)
(nm)
RX Voltage Package Temp TX RX Sens. RoHS
(nm)
(V)
(^oC) Power (dBm) Compliant
(dBm)
BTR-5840G
622
40
1310 1490
3.3
1X9 0 to 70 0 to -5 -28
Yes
Note: 1. BTR-XXXXG is 1X9 SC receptacle type package.
2. BTR-XXXX-APBBBG is 1X9 pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
3. 3W-TRX^TM is trade-mark co-owned by Zenko Technologies Inc. and Optoway Technology Inc.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Tstg
-40
Topr
0
---
Max
85
70
260
Units
o_C
o_C
o_C
Notes
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.13
3.3
3.47
Operating Temperature
Topr
0
70
Data Rate
50
622
650
Power Supply Current
Icc
260
Units
V
o_C
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V3.0