BTR-5820G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 1310 nm TX / 1490 nm RX , 3.3V / 155 Mbps RoHS Compliant Single-Fiber Transceiver

Optoway
1
BTR-5820G
***********************************************************************************************************************************************************************
BTR-5820G / BTR-5820-SPG / BTR-5820AG / BTR-5820A-SPG
1310 nm TX / 1490 nm RX , 3.3V / 155 Mbps RoHS Compliant Single-Fiber Transceiver
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional Transceiver
l 1310 nm LD Transmitter
The BTR-5820G series is high performance module for
single fiber communications by using 1310 nm transmitter
l 1490 nm Receiver
and 1490 nm receiver. This module is equipped with
l 1550 nm Video Block
l Distance Up to 20 km
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
l RoHS Compliant
l LVPECL Differential Inputs and Outputs
3W-TRX^TM OE device to reject 1.55 um high power
video signal. The transmitter section uses a multiple
quantum well 1310 nm laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated 1490 nm detector
preamplifier (IDP) mounted in an optical header and a
l 0 to 70^oC Operating : BTR-5820G
l -20 to 85^oC Operating : BTR-5820AG
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
l WDM 155/622 Mb/s Links
specified temperature and voltage limits. The optical ports
l SONET/SDH Equipment Interconnect
l Fiber Channel 532 Mb/s Links
l CATV
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate _{Distance TX}
(Mb/s) _(km)
(nm)
RX
(nm)
Voltage Package Temp
(V)
(^oC)
TX
Power
(dBm)
RX Sens. RoHS
(dBm) Compliant
BTR-5820G
622
20
1310 1490
3.3
1X9 0 to 70 -8 to -14 -28
Yes
BTR-5820AG
622
20
1310 1490
3.3
1X9 -20 to 85 -8 to -14 -28
Yes
Note: 1. BTR-XXXXG is 1X9 SC receptacle type package.
2. BTR-XXXX-APBBBG is 1X9 pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
3. 3W-TRX^TM is trade-mark co-owned by Zenko Technologies Inc. and Optoway Technology Inc.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
BTR-5820G
BTR-5820AG
10 seconds on leads only
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V1.0