OD880FHT Datasheet, PDF (1/2 Pages) OptoDiode Corp – HIGH TEMPERATURE GaAlAs IR EMITTERS

HIGH TEMPERATURE GaAlAs IR EMITTERS
OD-880FHT
GLASS
DOME
1.00
MIN.
ANODE
(CASE)
.209
.015
.220
FEATURES
• Extended operating temperature range
• No internal coatings
• No derating or heat sink required to 80°C
.183 .152
.186 .154
13 _.030
20 ^.040
.100
.017
CATHODE
.197
.205
All surfaces are gold plated. Dimensions are nominal
values in inches unless otherwise specified. Window
.041 caps are welded to the case.
.036
45°
RoHS
ER _{ELECTRO-OPTICAL CHARACTERISTICS AT 25°C}
PARAMETERS
B _{Total Power Output, Po}
Peak Emission Wavelength, λ_P
M _{Spectral Bandwidth at 50%, Δλ}
E _{Half Intensity Beam Angle, θ}
Forward Voltage, V_F
C _{Reverse Breakdown Voltage, VR}
E _{Capacitance, C}
Rise Time
TEST CONDITIONS
I_F = 100mA
I_F = 50mA
I_F = 100mA
I_R = 10μA
V_R = 0V
D _{Fall Time}
MIN
TYP
MAX
UNITS
6
8
mW
880
nm
80
nm
8
Deg
1.55
1.9
Volts
5
30
Volts
17
pF
0.5
μsec
0.5
μsec
E _{ABSOLUTE MAXIMUM RATINGS AT 25°C CASE}
IF _{Power Dissipation1}
Continuous Forward Current
L _{Peak Forward Current (10μs, 400Hz)2}
Reverse Voltage
F _{Lead Soldering Temperature (1/16" from case for 10sec)}
O _{1Derate per Thermal Derating Curve above 25°C}
2Derate _{linearly above 25°C}
D _{THERMAL PARAMETERS}
EN ^{Storage and Operating Temperature Range}
190mW
100mA
3A
5V
260°C
-65°C TO 150°C
Maximum Junction Temperature
150°C
Thermal Resistance, R_THJA1
Thermal Resistance, R_THJA2
370°C/W Typical
120°C/W Typical
1Heat _{transfer minimized by measuring in still air with minimum heat conducting through leads}
2Air _{circulating at a rapid rate to keep case temperature at 25°C}
Revision February 26, 2013
750 Mitchell Road, Newbury Park, California 91320
Phone: [phone], Fax: [phone]
Email: [e-mail], Website: www.optodiode.com