English
Language : 

OD-880WHT Datasheet, PDF (1/2 Pages) OptoDiode Corp – HIGH TEMPERATURE GaAlAs IR EMITTERS
HIGH TEMPERATURE GaAlAs IR EMITTERS
OD-880WHT
GLASS
.006 HIGH
MAX
.015
1.00
MIN.
ANODE
(CASE)
.209
.220
.183 .152
.187 .156
.098
.112
.143
.150
.100
.017
CATHODE
.041
.036
45°
FEATURES
• Extended operating temperature range
• No internal coatings
• No derating or heat sink required to 80°C
All surfaces are gold plated. Dimensions are nominal
values in inches unless otherwise specified. Window
caps are welded to the case.
RoHS
ELECTRO-OPTICAL CHARACTERISTICS AT 25°C
PARAMETERS
Total Power Output, Po
Peak Emission Wavelength, LP
Spectral Bandwidth at 50%, $L
Half Intensity Beam Angle, Q
TEST CONDITIONS
IF = 100mA
IF = 50mA
Forward Voltage, VF
Reverse Breakdown Voltage, VR
Capacitance, C
Rise Time
IF = 100mA
IR = 10MA
VR = 0V
Fall Time
MIN
TYP
MAX
UNITS
7
9
mW
880
nm
80
nm
80
Deg
1.55
1.9
Volts
5
30
Volts
17
pF
0.5
Msec
0.5
Msec
ABSOLUTE MAXIMUM RATINGS AT 25°C CASE
Power Dissipation1
Continuous Forward Current
Peak Forward Current (10Ms, 300Hz)2
Reverse Voltage
Lead Soldering Temperature (1/16" from case for 10sec)
1Derate per Thermal Derating Curve above 25°C
2Derate linearly above 25°C
190mW
100mA
3A
5V
260°C
THERMAL PARAMETERS
Storage and Operating Temperature Range
-65°C TO 150°C
Maximum Junction Temperature
150°C
Thermal Resistance, RTHJA1
Thermal Resistance, RTHJA2
370°C/W Typical
120°C/W Typical
1Heat transfer minimized by measuring in still air with minimum heat conducting through leads
2Air circulating at a rapid rate to keep case temperature at 25°C
750 Mitchell Road, Newbury Park, California 91320
Phone: (805) 499-0335, Fax: (805) 499-8108
Email: sales@optodiode.com, Website: www.optodiode.com