OD-800L Datasheet, PDF (1/2 Pages) OptoDiode Corp – HI-REL RAD HARD IR EMITTERS

HI-REL RAD HARD IR EMITTERS
OD-800L
GLASS
DOME
1.00
MIN.
ANODE
(CASE)
.015
.209
.220
.183 .152
.186 .156
.024
.043
.100
.017
CATHODE
.143
.150
.041
.036
45°
FEATURES
• Designed for high radiation tolerance
• Excellent power degradation characteristics
• High power output
• Fast response
• Hermetically sealed metal package
• MIL-S-19500 screening available
• No internal coatings
All surfaces are gold plated. Dimensions are nominal
values in inches unless otherwise specified. Window
caps are welded to the case.
ELECTRO-OPTICAL CHARACTERISTICS AT 25°C
PARAMETERS
TEST CONDITIONS
MIN
Total Power Output, P_o
Peak Emission Wavelength, λ_P
Spectral Bandwidth at 50%, ∆λ
Half Intensity Beam Angle, θ
I_F = 100mA
2
I_F = 50mA
Forward Voltage, V_F
Reverse Breakdown Voltage, V_R
Capacitance, C
Rise Time
I_F = 100mA
I_R = 10µA
3
V_R = 0V
Fall Time
TYP
3
810
50
35
1.45
4
150
60
60
MAX
1.8
UNITS
mW
nm
nm
Deg
Volts
Volts
pF
nsec
nsec
ABSOLUTE MAXIMUM RATINGS AT 25°C CASE
Power Dissipation¹
Continuous Forward Current
Peak Forward Current (10µs, 150Hz)²
Reverse Voltage
Lead Soldering Temperature (1/16" from case for 10sec)
1Derate _{per Thermal Derating Curve above 25°C}
2Derate _{linearly above 25°C}
180mW
100mA
3A
3V
240°C
THERMAL PARAMETERS
Storage and Operating Temperature Range
-65°C TO 150°C
Maximum Junction Temperature
Thermal Resistance, R_THJA1
Thermal Resistance, R_THJA2
150°C
400°C/W Typical
135°C/W Typical
1Heat _{transfer minimized by measuring in still air with minimum heat conducting through leads}
2Air _{circulating at a rapid rate to keep case temperature at 25°C}
OPTO DIODE CORP.
750 Mitchell Road, Newbury Park, California 91320
Phone [phone] FAX [phone]
1 of 2