AXUV20ELG Datasheet, PDF (1/2 Pages) OptoDiode Corp – PHOTODIODE 20 ELEMENT 22 pin dual in-line package

PHOTODIODE 20 ELEMENT
AXUV20ELG
FEATURES
• 22 pin dual in-line package
• Ideal for electron detection
• 100% internal QE
Dimensions are in inch [metric] units.
ELECTRO-OPTICAL CHARACTERISTICS AT 25°C (Per Element)
PARAMETERS
Active Area
TEST CONDITIONS
MIN
0.75mm x 4.1mm
Responsivity, R
(see graphs on next page)
Reverse Breakdown Voltage, V_R
I_R = 1µA
Capacitance, C
V_R = 0V
Rise Time
V_R = 0V
Shunt Resistance (per element)
V_f = ±10mV
100
TYP
3
25
MAX
40
200
UNITS
mm²
A/W
Volts
pF
nsec
MOhms
THERMAL PARAMETERS
STORAGE AND OPERATING TEMPERATURE RANGE
Ambient¹
Nitrogen or Vacuum
Maximum Junction Temperature
Lead Soldering Temperature²
-10° TO 40°C¹
-20°C TO 80°C
70°C
260°C
1_{Temperatures exceeding these parameters may create oxide growth on the active area.}
Over time responsivity to low energy radiation and wavelengths below 150nm will be compromised.
2_{0.080" from case for 10 seconds.}
Shipped with temporary cover to protect photodiode and wire bond.
Review Opto Diode “Handling Precautions for IRD Detectors” prior to removing cover.
Revision February 26, 2013
750 Mitchell Road, Newbury Park, California 91320
Phone: [phone], Fax: [phone]
Email: [e-mail], Website: www.optodiode.com